TAB solar batteries are designed to supply energy to homes that operate using solar energy and that require a battery bank that can be slowly discharged over a long period of time. 12 TAB 5 TOPzS 625-812Ah 2v batteries are very reliable given their number of years on the market, lasting on average about 1200 cycles applying discharges of up to 60%. The lower the depth of discharge, the longer the battery life will be, although the most common is that this type of stationary battery banks last between 9 and 12 years. The connection bridges and battery screws are attached with the complete group of 12 accumulators to form a 24V battery.
Contact to receive more information.
– Measurements: 198 x 119 x 720 mm.
– Weight: 43,2 Kg each glass.
– Voltage: 2V each glass (12 glasses in total: 24V).
– Battery type: Stationary TOPZS.
– Capacity in C100: 812Ah, and in C10: 625Ah.
- Low maintenance.
– M10 terminals with threaded insertion.
– Positive plates formed by tubular plate with selenium grid lead alloy.
– Negative plates formed by plates with a lead and selenium alloy grid.
– Useful life of more than 15 years.
– 1.500 deep discharge cycles.
– Maximum charging efficiency.
– Safer connectors against accidental contacts.
– Translucent polypropylene container.
Features of the TAB TOPzS Solar Battery TAB TOPzS is the most suitable type of stationary battery for photovoltaic solar systems, which must be connected between the charge regulator and the inverter. It is a deep cycle stationary battery, whose main advantages over monoblock batteries are the depth of discharge and long service life. The percentages go up to 70% although we do not recommend going beyond 50% on a regular basis and its life cycles, which can reach 1500 cycles with an average discharge depth of 50%. , considering a cycle a complete discharge and a complete battery charge.
The TAB battery, manufactured in the European Union, has been tested for more than 20 years that the factory has been producing batteries, with a failure rate of less than 0% of the total batteries, providing security in its commercialization and guarantee of operation. in solar photovoltaic systems.
The accumulators must always be connected in series until reaching the working voltage of the inverter, that is, if we have a 12V inverter, we will need 6 accumulators connected in series, while if our installation is 24V or 48V we will need 12 or 24 accumulators respectively.
These types of batteries are designed for use in systems that require a constant supply of energy such as homes isolated from the electrical grid, with their respective computers, televisions, refrigerators or any other domestic appliance that requires electrical energy.
The TAB TOPzS Solar Battery, as shown on the label, is rated at various discharge rates, with the most frequently used rates being C10 and C100.
