2.715,00€ (VAT included)
WccSolar recommends the use of SOPZS batteries in installations where daily use is expected for many years. It is the economic model of the traditional SOPZS solar battery. It is manufactured in a cheaper container and automatically, which affects the final price of the product. This SOPZS model and up to 6000 discharge cycles at 20% (the usual consumption in a correctly sized solar installation). It stands out for its low level of self-discharge, low maintenance, and the quality of all its components.
Contact us to receive more information.
Data sheet
– Measurements: 198 x 137 x 613 mm.
– Weight: 43.4 Kg each glass.
– Voltage: 2V each glass (12 glasses in total: 24V).
– Battery type: SOPZS stationary.
– Capacity in C100: 956Ah, and in C10: 711Ah.
- Low maintenance.
– M10 terminals with threaded insertion.
– Positive plates formed by tubular plate with selenium grid lead alloy.
– Negative plates formed by plates with a lead and selenium alloy grid.
– Useful life of more than 15 years.
– 1.500 deep discharge cycles.
– Maximum charging efficiency.
– Safer connectors against accidental contacts.
– Translucent polypropylene container.
Characteristics
Characteristics of the Sunlight Solar Battery SOPZS is the most appropriate type of stationary battery for solar photovoltaic systems and must be connected between the charge regulator and the inverter. It is a deep cycle stationary battery, whose main virtues compared to monoblock batteries are depth of discharge and long useful life. The percentages go up to 70% although we do not recommend going beyond 50% on a regular basis and its life cycles, which can reach 1500 cycles with an average discharge depth of 50%. , considering a cycle a complete discharge and a complete battery charge.
The Sunlight battery, manufactured in the European Union, has been tested for more than 20 years that the factory has been producing batteries, with a failure rate of less than 0% of the total batteries, providing security in its commercialization and guarantee of operation. in solar photovoltaic systems.
The accumulators must always be connected in series until reaching the working voltage of the inverter, that is, if we have a 12V inverter, we will need 6 accumulators connected in series, while if our installation is 24V or 48V we will need 12 or 24 accumulators respectively.
These types of batteries are designed for use in systems that require a constant supply of energy such as homes isolated from the electrical grid, with their respective computers, televisions, refrigerators or any other domestic appliance that requires electrical energy.
The Sunlight SOPZS Solar Battery, as shown on the label, is rated at various discharge rates, with the most frequently used rates being C10 and C100. Normally, in batteries for solar and renewable energy, the rate that predominates over the rest is the C100 rate, which means that to calculate the capacity of this battery, the battery has been subjected to continuous discharge for 100 hours and this has been able to draw the amps that are marked.
Whenever we need stationary solar batteries, intended for use in homes and with permanent consumption, the C100 measurement is very reliable, since it refers to a discharge of around 4 days, which is the closest to what happens in reality.
