219,01€ (VAT included)
3 in stock
Shurflo 12-2088-313 Automatic 145V Pressure Pump with Pressure Switch
La Shurflo pressure pump 2088-313-145 It operates at 12V direct current and is capable of pumping 13.6 liters per minute, providing a maximum pressure of 3.4 bars.
It has a 2-year warranty and is very common in the use of agricultural spraying with phytosanitary products due to its valve viton, as well as in small houses that want to have water pressure in their tap or to turn on heaters, whether gas or electric.
This type of pump is for continuous use, so can be used without interruption time that is needed.
The water inlet and outlet are made of 1/2″ diameter male thread, it incorporates a pressure switch in the head of the pump in which we can regulate the stop and start point of the pressure switch, as we press the central screw the pump will cut off the water flow at a lower pressure.
This water pump can be used for pumping or spraying water with phytosanitary products for agricultural use, as well as clean water.
It has 20 centimeters of cable on the positive and negative pole, to facilitate connection to the 12V source, be it a battery or a power source.
The 12V booster group is suitable for powered by solar energy with a XNUMX/XNUMX pump controller.
It is a Shurflo self-priming pump up to 2.44m which, given its technology, allows reaching 3.4 bars of pressure at its outlet. To reach this pressure, about 121.20 W will be necessary; The Shurflo 12V pressure pump control controls its own operation through the adjustable pressure switch.
The pump that we present Shurflo 2088-313-145 12V, can be applicable to small homes or caravans that with it, they can supply water with pressure; If this is the case, it is highly recommended to use a water tank or accumulator, commonly called a boiler, thus avoiding having to force the Shurflo 12V pressure group to start continuously.
Applications:
Technical Features:
It is recommended that it be installed in its natural position, that is, horizontally. It is also recommended that a non-return valve be installed on the pump suction. We recommend cleaning the pump with clean water after use with corrosive liquids such as phytosanitary products.
Technical specifications
Manual / Technical Sheet
