175,00€ (VAT included)
51 in stock
Bomb Solar Horizontal Surface SQB2.3/40-D36/400W
The motor protection of the SQB2.3/40-D36/400W Solar Surface Pump is IP54. It is a pump designed to move a large flow at a height of less than 40 meters, with liquid suction at less than 8 meters. It is capable of pumping up to 2.3 m3/h.
Solar Horizontal Surface Pump allows you to operate with free electricity from the sun and without paying electricity to the electricity company. The approximate operation of the pump will be 8 hours/day in summer and 5-6 hours/day in winter.
The SQB2.3/40-D36/400W Solar Surface Pump is designed for agricultural and industrial uses, being optimal for supplies in chalets, country houses, small sanitary applications, etc. Perfect for automatic water distribution as pressure equipment. SQB surface pumps are perfect for intensive uses.
The SQB2.3/40-D36/400W Solar Surface Pump is built in gray cast iron, incorporating a stamped brass impeller. The shaft is constructed of stainless steel, with a graphite ceramic mechanical seal.
The SQB2.3/40-D36/400W solar pumps have a 2-year manufacturing warranty, being an option to take into account when purchasing any pump for daily and repetitive use, over a long period of time. The SQB2.3/40-D36/400W Solar Surface Pump is a centrifugal impulsion pump.
All SQB2.3/40-D36/400W solar pumps are built in 1 inch, the diameter of the mouth on the impulsion part and the ejection part always match.
Data sheet
Pump body and support: Gray cast iron
Impeller: Stamped brass
Motor shaft: AISI-304 stainless steel
Mechanical seal: Ceramic/Graphite
Fluid: Clean water
Liquid temperature: Max. 50ºC
Suction height: Max. 8m
Working pressure: Max. 4 bar (56psi)
Max Flow: 38.33 l/min (2300L/ Hour)
Max Height: 40 m
Direct Current Motor: 36V
Insulation class: B
Protection grade: IP44
Suction ø: 1”
ø discharge: 1”
Motor power: 400w
Weight: 6,2 kg
Mouth filter: Copper
Pump cable: 2.5mm2/4mm2
Operating temperature -20C ~ +50C
Operation:
Operation: 2 solar panels of 300w, 310w, 320w, 330w
Way to connect panels: Two Parallels
Input range: 20-68vdc
Nominal current: 12A
Over protection current: 15A
Maximum protection current: 18A
Controller Type: MPPT
Well Sensor Included
Tank Sensor Included
