119,00€ (VAT included)
This battery combiner kit is for adding a second or third battery system to your car, boat, RV or any other vehicle. It uses the simplest and most advanced technology to keep all your batteries charged using the engine's electrical system, but isolates the starter battery when charging stops so you're never left stranded.
Cyrix-ct battery combiner manual
Kit to add a second or third battery system in your car, boat, RV or whatever you want. It uses the simplest and most advanced technology.
to keep all of your batteries charged using the engine's electrical system, but isolates the starter battery when charging stops so it never
get stranded
The Cyrix-ct 12/24-120 is a voltage sensitive bi-directional relay. Therefore, it will also be activated if, for example, the additional battery is being charged.
by a battery charger.
Intelligent battery monitoring prevents cycling. Cyrix software does more than just plug and unplug based on battery
voltage and with a fixed time delay. The Cyrix observes the general trend (increasing or decreasing voltage) and reverses a previous action only if
the trend has reversed over a certain period of time. The delay time depends on the voltage deviation from the trend.
Parallel emergency function. If necessary, an emergency start push button can be wired to the “start assist” connection (85). The relay will activate
for 30 seconds after 'jump assist' has been momentarily connected to the battery plus. Alternatively, a parallel connection switch can be used to
Activate the relay while the switch remains closed.
Easy to install. There is no need to cut any factory wiring that could void your boat or vehicle manufacturer's warranty.
Kit include:
Cables and terminals included.
– 6mtr RED 10mm² Cable
– 0,5mtr BLACK 10mm² cable
– 0,2 mtr 1,5 mm² BLACK cable assembly with M8 terminal and 6,3 mm quick terminal
– 2 M8 cable lugs with insulation sleeve
– 4 M6 cable lugs with insulation sleeve
– 4 cable ties of 150 mm
