2KVA AC Stabilizer

    2KVA AC Stabilizer

    480,00 (VAT included)

    Características técnicas:

     

    • Reference: SVC-D2K
    • Power: 2kVA (2000VA – 1600W)
    • Maximum output current: 6,95A
    • Input voltage range: Single-phase 160V-270V 50Hz – 230Vac ±25% (adjustable up to ±30%) + Ground
    • Output voltage range: Single-phase at 230V, 50Hz/60Hz with ground – 230Vac ± 2% (adjustable) + Ground
    • Output regulation: With ±10% input: ±2% output, with ±20% input: ±5% output, with ±30% input: ±10% output
    • Power Factor: 0,8
    • AC-AC performance: >96%
    • Response time: < 0,5 sec (within ±10% of input)
    • Control type: Fully electronic
    • Output waveform: Pure sine wave and zero distortion, does not modify the input waveform
    • Protections: Overload, overcurrent, overtemperature, short circuit,…
    • System with protection (I+II) and against: Fall of neutral or phase to ground, neutral or phase failure, eliminates AF/MF harmonics, peaks, high/low voltages, lightning and atmospheric discharges, defects, transient and permanent overvoltages, …
    • Indications and measurements: Digital input/output indicators (ammeter and voltmeter)
    • Dielectric strength: 1500V capacity for a sinusoidal voltage for 1 minute without electric cuts or arcs
    • Dielectric insulation: > 2 MΩ
    • Visual indications: Red LEDs for high/low input voltage, green LED for normal operation…
    • Overload capacity: 20% for 60 min, 40% for 30 min and 60% for 5 min
    • Input protection: Automatic magneto-thermal Curve D
    • Input connection: Input connection strip with F+N+T
    • Output connection: Output connection strip with F+N+T
    • Working temperature: -5º ~ +40ºC
    • Sizes: 340x180x240mm
    • Weight: 14Kg
    • Regulations: CE EN 60950-EN 61558-EN 55024, ISO 9001

    Features:

    • High AC-AC performance, above 96%
    • Does not warp or distort the output sine wave, giving a pure output
    • The precision of the output voltage has a practically fixed and stable value
    • It does not emit radiation, gases, noise, vibrations,…
    • The equipment does not require maintenance or generate breakdowns, with a mean time between failures (MTBF) greater than 100.000 hours of operation and a life expectancy of more than 10 years

     

    SKU: stabili2kva Categories: ,

    Description

    2KVA (1600W) alternating current stabilizer with 230Vac output. Servomotor stabilizer for controlling the input network voltage within regulation margins, providing a constant output voltage to supply any load with a clean, stable and safe voltage.

    The 2KVA AC Stabilizer stabilizes the input network voltage within very narrow regulation margins to supply any load at its output with a clean, stable and safe voltage. It does this by continuously monitoring and sampling the input and output voltages, thus achieving the appropriate voltage to supply the connected load.

    This equipment works fully automatically for voltage regulation without user intervention, which is achieved by continuously measuring the input voltage of the network and automatically carrying out the necessary up/down operations to provide the constant voltage necessary for a normal functioning. The integrated electronic control circuit measures the input voltage, deciding what the stabilized output voltage should be by comparing it with an internal reference sample value and with the applied load. This is why stabilizers are used to power equipment sensitive to voltage variations or to solve problems in installations with large voltage variations due to problems in the supply line.

    The response time is less than 1 second if the input network does not exceed 10% of the nominal voltage. This stabilizer includes an intelligent protection system (SPI) at its input that protects against power line defects caused by microcuts, neutral or phase to ground drops, phase or neutral failures, eliminates AF/MD harmonics, protects against spikes voltage, high and low voltages, lightning and atmospheric discharges, transient and permanent overvoltages, starts and stops of motors or drives, etc. Even so, it is necessary to install a circuit breaker at the output to protect it against long-term overloads. It should also be noted that this type of stabilizer does not deform the output sine wave.

    The stabilizer has an LED display of input and output voltage, as well as equipment status indicators. The green LED indicates normal operation and stabilizing; left red LED indicates low input voltage; The red LED on the right indicates high input voltage.

    Its main applications include computing, audio/video equipment, telecommunications systems, medical and clinical analysis equipment, security systems and surveillance cameras, critical electronic circuits and boards, lighting systems, household appliances, home automation, etc...

    Other application sectors are found in industry, telecommunications, electrical supply companies, military applications, stock exchanges and banks, hospitals, supermarkets, shopping centers, financial institutions, airports, transportation industries, trains, railways, shipping industries, production lines and automatic calculation, textile and paper industries, ... and in general in all those applications that have a very critical load to power and that need to have a stable, clean and safe power network.

     

    Features:

    • High AC-AC performance, above 96%
    • Does not warp or distort the output sine wave, giving a pure output
    • The precision of the output voltage has a practically fixed and stable value
    • It does not emit radiation, gases, noise, vibrations,…
    • The equipment does not require maintenance or generate breakdowns, with a mean time between failures (MTBF) greater than 100.000 hours of operation and a life expectancy of more than 10 years

    Note: The power in Watts has been calculated based on an installation with a power factor of 0,8. For installations with a power factor less than 0,8, the power in Watts will always be lower than indicated and must be recalculated.

    Note: It is highly recommended to install a circuit breaker at the outlet to ensure that the capacity of the equipment is never exceeded in consumption demand.

    Note: To connect the SVC-D1K model, you only have to plug its connection cable into a grounded wall outlet, checking that the mains supply voltage is within the equipment specifications.

    IMPORTANT: THE GROUND MAIL MUST BE CONNECTED FOR THE SAFETY OF PERSONNEL.

    For more information, you can download the technical sheet by clicking on the “Attachments” tab.

    Material for professional use, it must be installed by qualified personnel, respecting the regulations in force at the installation site.

    Open chat
    1
    Hi
    How can we help?
    Customer service
    +34 854 556 349