195,00€ (VAT included)
67 in stock
1000VA 12V charger inverter, with 50A PWM special for photovoltaic solar kits, it is a pure sine wave inverter with a charger batteries of 20A and regulator 50A PWM solar integrated in a single device. It is one of the best solutions on the market today, since it is capable of managing the load of solar, charging the batteries, and also has a battery charger, which allows them to be charged from a gasoline generator set or from the electrical grid in the event that the solar panels are not capable of supplying the necessary energy. The function of hybrid Solar inverters is not to pass current through the batteries throughout the day, but rather to use the energy they provide. The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.
These are pure wave inverters and some of the models are also parallelizable, supporting higher powers than other inverters.
The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.
The inverter is capable of generating a pure sine wave, with the same characteristics as that created by the conventional electrical grid.
All of this can be view using the LCD display. which is included in the Must Solar Inverter casing. In addition, the equipment from the Must Solar manufacturer allows the programming of the operating parameters of the installation, as well as the inverter wifi connection to be able to monitor it from any computer through a web page.
Operating diagram:
If it is at night, on a cloudy day, or if there is a demand for energy greater than what the panels can provide, the necessary energy is provided by the battery bank. If, for example, at 12:00 noon we are producing 1.500W with the solar panels, and the home consumes 500W at that time, we will be charging the batteries with the remaining 1.000W, in order to have supply during the night.
Installation of 1KVA PK 12v hybrid inverter
In order to provide maximum protection for both the inverter and the system in general, we advise you to put a Protection and pre-installation kit. The installation of this model of 1Kva 12v hybrid inverter is simple with your pre-installation kit, however at Wccsolar we recommend that the 1Kva 12v hybrid inverter be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.
Buy 1KVA PK 12v hybrid inverter
Buy the 1Kva 12v hybrid inverter It is fast, safe and comfortable thanks to Wccsolar, in addition to the 1Kva 12v hybrid inverter It has an official Wccsolar guarantee.
Contact us to receive more information.
2 years warranty
Data sheet
Features:
- Model: 1KVA PK
– Rated power: 1000VA /1000W.
– Input voltage: 12V.
– Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for home appliances).
– Frequency range: 50Hz/60Hz (automatic detection).
– Output voltage regulation (battery mode): 230 VAC +-5%
– Maximum power (starting peaks): 2000VA.
– Efficiency: 93%.
– Transfer time: 10 ms (for computers) 20 ms (for home appliances).
– Wave type: Pure sine wave.
– Maximum voltage of the photovoltaic panel open circuit 50VDC
– Battery voltage: 12V.
– Float charging voltage: 13.5V.
– Overload protection: 15V.
– Regulator charging current: 50A.
– Charger charging current: 20A.
– Power consumption in stand-by: 1W.
– Measurements: 95 x 240 x 316 mm
– 2-year warranty for transformer and 1 year for the rest
- Weight: 6 Kg.
Characteristics
The WccSolar 1000VA 12V charger inverter includes – among other things – a 12V battery charger with a capacity of 20A, which is powered by a 230V alternating current power source. The solar charge regulator that it incorporates is 50A with PWM technology, and a maximum photovoltaic power capacity of 1000W, which means that the power of the photovoltaic solar field should not exceed 1000W total. Thanks to the existing possibility of being able to introduce a gasoline generator or the electrical network, it allows the batteries to be charged through this source in addition to powering the home by bypass, in this way, there will be no time in which the installation runs out. energy.
The WccSolar 1000VA 12V charger inverter, with 50A PWM regulator, is fully programmable and configurable through its information screen, with the possibility of connecting an external generator, it will ensure that you will never be without electricity.
The speed of interconnection between the grid, solar panels or batteries is so fast that absolutely nothing is perceived; You will always have a fluid supply of electrical energy without interruptions.
The LCD screen has a resolution of 255 x 160 pixels with backlighting making it easy to read. Energy generation data, alerts and other information are displayed to the user in a clear and simple way.
The 1000VA 12 WccSolar Charger inverter is an all-in-one system that does not need any additional devices.
The 1000VA 12V WccSolar Charger inverter always prefers energy from the sun or batteries and as a last resort it will use energy from the electrical grid or the generator set, so you will be independent of your electricity company.
Inverter Easy to install
There is no other system as easy to install as the 1000VA 12V WccSolar Inverter Charger series. This is not only good for the person doing the installation: you will also save time, space and money.
Configuration of the 1000VA 12V WccSolar PWM 50A Inverter Charger
Remote control and programming software included (WATCHPOWER) and inverter-computer USB cable. WatchPower includes monitoring application and inverter configuration application. Allows control and monitoring of various devices via AN, Internet or USB. Warning or alarm notifications via audible alarm, pop-up screen, broadcast, SMS, inbox message and email.
