Hybrid inverter

    Multifunction Hybrid Inverters

    Hybrid solar inverters or multifunction solar converters for installations in 12 volt, 24 volt and 48 volt systems that require the connection of electrical appliances at 220v/380v Hybrid inverters or multifunction solar converters are made up of a powerful pure wave current converter , a charge regulator or controller and a battery charger, have a screen through which you can control the operation of the solar installation and configure the use parameters of each component. At WccSolar our hybrid inverters or converters have the function of being able to connect them in parallel and reach a power of up to 50KW Watts.

    Showing 1-32 of 64 results

    Products

    Hybrid Inverters

    Hybrid inverters have a very high priority in renewable energy systems and off-grid energy applications. These inverters are capable of integrating various energy sources, such as solar energy, wind energy, and grid energy, and managing them efficiently to power electrical devices.

    Hybrid inverters also allow energy to be stored in batteries for later use when renewable energy or grid power is not available. Additionally, some hybrid inverters can operate in power backup mode, activating automatically in the event of a power failure from the electrical grid.

    Another advantage of hybrid inverters is their ability to provide high-quality, stable power to electrical devices, thanks to their pure sine wave technology. They can also be integrated with smart energy management systems to optimize energy use and reduce the cost of electricity.

    In summary, hybrid inverters have a high priority in renewable energy systems and off-grid energy applications due to their ability to integrate multiple energy sources, store energy in batteries, provide stable and high-quality power, and operate in power backup mode.

    Benefits of these Multifunction Inverters

    With the use of inverter chargers we ensure that there are no interruptions in the electrical supply of our home or company. In the event of blackouts, the charger inverter takes only 20 milliseconds to provide electrical current, preventing our electronic devices from turning off. Some inverter chargers allow the joint connection of up to 6 inverters to increase the output power, which is highly recommended for those photovoltaic installations that are planned to be expanded.

    Most inverter chargers provide an output alternating current with a pure sine type wave, this current is ideal for powering most household appliances.

    Incorporating a charger into the solar installation allows you to avoid having to oversize the solar system excessively. In case of low production days and we have an inverter charger, we can, if necessary, charge the batteries from the generator set or network. In this way we do not need to have batteries with much more capacity to cover these few days a year of low solar production.

    Another advantage of the installation is the possibility of supplying energy to the home while charging the batteries. The inverter charger, having a built-in charger inside, allows that when there is an auxiliary energy source, the energy supply to consumers is made directly from the auxiliary source and at the same time the batteries can be charged.

    The incorporation of the automatic start of the generating set from free power contacts will allow us to program the automatic start of the generating set when the battery charge drops below a certain value. In this way you will avoid excessive discharge of the battery without having to eliminate household consumption. Once the battery charge has been recovered, the relay sends a signal to the generating set to stop. The system is completely autonomous.

    Aspects to take into account about inverter chargers

    The power of the charger is determined by the maximum charging amps and the voltage of the battery bank. As an example, if our charger is 50 amps in a 48-volt inverter, it will demand a power from the generating set of just over 2.400W (50A * 48V = 2.400W).

    The 50 amps indicate the maximum charging current to the battery. This current is direct current (DC) and has had to be transformed internally by the charger from the alternating current (AC) generated by the electronic group. As in any energy transformation, the resulting energy is lower than the initial one given the losses in the transformation processes and therefore, the energy that the generating set must deliver will be greater than those 2.400W. This value will depend on the efficiency of the equipment, with common values ​​being 95 to 98%. Therefore the group must deliver about 2.500W.

    Connection of solar panels

    Once the model of solar panels that will offer the home or industrial warehouse the necessary energy has been selected, it is necessary to decide on the appropriate connection so that there is compatibility with the rest of the elements of the installation, the types of connections and the impact that have with the rest of the devices is explained below:
    1- Parallel Connection: The intensity increases and the tension is the same.

    Example: If we place 3 panels in parallel, the intensity of each panel will be multiplied by 3 and the voltage will remain the same.
    2- Serial Connection: The tension is added and the intensity remains the same.

    Panels-series.jpg

    Example: If we place 3 panels in series, the voltage of each panel will be multiplied by 3 and the intensity will remain the same.

    3-Series-parallel connection: It is a setting that increases both voltage and intensity depending on the setting.

    PlusEnergy Solar (WccSolar) has become the exclusive official distributor of the DEYE brand of photovoltaic solar inverters. Thus, the Spanish firm specialized in the distribution of solar PV materials since 2010, will selectively undertake the distribution of the range of DEYE solar inverters among its current partners, that is, the most important and relevant wholesale warehouses of electrical material in Spain. to which it currently supplies other solar PV inputs.

    DEYE Microinverter

    The available range will be made up of 0.6Kw ~2Kw microinverters; string, single-phase and three-phase inverters; and hybrid inverters, also in single-phase and three-phase versions.

    DEYE single-phase and three-phase inverter

    String inverters are available from 3,6kW to 110kW, thus covering any type of solar self-consumption installation. These inverters offer the built-in “0” injection function, thanks to their standard toroidal clamp, and can be combined with their corresponding wattmeters. In addition, the three-phase string inverters are parallelizable, and up to a maximum of 16 units can be added.

    DEYE Hybrid Inverter

    The main job of a grid-tied inverter is to convert the DC power generated from the PV array into usable AC power. Hybrid inverters go a step further and run on batteries to store excess energy as well. In the developing world, hybrid inverters are more of a necessity to compensate for weak or intermittent grids or a complete lack of electricity from the grid.

    Deye hybrid inverters include 3~16kW single-phase and 3~50kW three-phase. The rest of them adopt a 48V and 102V battery. In addition, the SUN-16K-SG01LP1-EU is the maximum single-phase hybrid inverter on the world market with the 48v battery.

    In addition, the SUN-50K-SG50HP01-EU-BM 3kw hybrid inverter will also be a game-changer in this world. The powerful 50kw hybrid inverter can be connected to the battery and will effectively solve most industrial systems.

    The Grid-interactive inverter consists of several hardware elements. The Grid-interactive inverter controls and monitors the connection of electricity from power plants. In addition, it also controls the disconnection of surplus energy from the plants. Ensures energy dispatch during peak hours based on demand.

    DEYE hybrid inverters are, without a doubt, some of the most complete on the market, capable of operating in isolated installations without a grid, and can be parallelized, in both their single-phase and three-phase versions, in up to 16 units in cascade. Furthermore, they can function as a self-consumption inverter, with or without batteries, with countless features and functionalities, providing them with differential added value compared to other hybrid inverters on the market.

    DEYE Lithium Batteries

    There is also our latest series of low voltage 48v se-g series 5.1kw and high voltage GB-L 4.09kw series battery systems, which continue to use Deye's constant stable technology and will be launched in 2023.

    PlusEnergy Solar as a knowledgeable player in the photovoltaic market and exclusive Deye Distributor We are committed to serving all end customers and installers who have installed DEYE inverters.



    Open chat
    1
    Hi
    How can we help?