Description
The GridFree inverter with limiter with an output of 1000W works with the input voltage range of 45-90 Vdc. The limiter can reduce the output power according to the actual consumption of the house. The MPPT function provides maximum efficiency of the solar.
The GridFree inverter with limiter is a revolutionary solution for domestic solar installations that works in a similar way to other GridFree microinverters, but they are capable of reducing their own production according to the current consumption of the house and thus completely avoid overflows to the public grid. .
These inverters are designed for internal use and you can monitor the current values on the color screen where the following values are displayed:
- Current output power of solar panels / battery
- Energy supplied from the public grid
- DC input voltage
- Temperature
- Grid voltage
- Date and Time
- Daily production graph
- Inverter adjustment
Contact us to receive more information.
|
There are also specific inverter settings suitable in the case when the battery is in the DC input IE. Working input voltage (lower limit) and the maximum output power of the inverter.
GridFree inverter operates in the input range of 45-90 Vdc voltage and continuous power is 1000w. Inverter output is at rated voltage 230VAC and output is connected between the main circuit breaker to the electricity meter box and house circuit breaker.
Inverter transfer energy from solar panels or batteries to the home electrical grid. Your devices will have energy from their own production. The idle power is taken from the public grid in case the output power of its own production will not be sufficient for all appliances. Can Protect your system against unwanted overflows to the public grid when it will produce more energy than the appliances require by installing the supplied current sensor. This sensor connects directly to the inverter and make sure the sensor is connected to the tight side in the sensor case.
The Grid Connection Inverter is an inverter that allows us to interconnect with the electrical grid without the need for batteries, which is why this type of installation is economical and very profitable in the long term, given its low cost from a simple installation and with few electronic devices that make the system more expensive.
For a grid connection installation to work correctly, we will need a group of solar panels, previously calculated to adapt to the needs of each case, and a grid connection inverter, which will allow us to transform energy from the sources into alternating current. solar panels in order to make use of it
The inverters have a zero grid injection system, this means that in the event that the solar installation is producing more energy than the home or industrial warehouse is consuming, the zero injection system will allow us to reduce the power at will. power of the inverter only in the event that there is an energy surplus.
In summary, the functionality of zero injection systems is to reduce the power of the inverter when the energy produced is greater than the energy consumed, thus preventing it from being discharged into the general electrical grid.
|
|
1000w Inverter Installation Zero discharge grid injection
The installation of this model of Inverter 1000w Injection into the zero discharge network is simple, however at Wccsolar we recommend that you be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.
Buy Inverter 1000w Zero discharge grid injection
Buy the Inverter 1000w Zero discharge grid injection It is fast, safe and comfortable thanks to Wccsolar, in addition to the 1000w Inverter Zero discharge grid injection It has an official Wccsolar guarantee.
Contact us to receive more information.
ING Manual
ESP Manual
LIMIT ESP Manual
Wifi Manual
Data sheet
- Input data
- Input voltage range 45-90vdc
- Max continuous input voltage 50V/90V
- Peak power tracking voltage 50V/90V
- Resulting data
- maximum output power 1000W
- Nominal voltage 230Vac
- Rated voltage range 185-265v
- Frequency range 47,5 to 51,5 for 50 Hz, 60 Hz 59,3 to 60,5
- Power factor > 0,95
- Output waveform Pure sine wave
- characteristic data
- MPPT efficiency 99%
- Overvoltage protection yes
- About temperature protection yes
- Reverse polarity protection yes
- Anti-island protection yes
- stackable Only by AC outlet
- Operating temperature range -20 0 C to 50 0 C
- Inverter indoor temperature -20 0 C ~ + 85 0 C
- Current THD <5%
- THD voltage <5%
- Automatic Cooling
- Peak converter efficiency > 92%
- 2 years warranty
- Type: DC/AC Inverters
- Input voltage range: 45-90V/
- Specification: 322*196*88mm
- Sensor cable length: 3 meters
- (Save up to more than €45 per month on electricity through this device sold in our online store)
Characteristics
(Save up to more than €45 per month on electricity through this device sold in our online store)
(Save up to more than €45 a month in electricity using this appliance for sale in our online store)
Operation of a self-consumption solar kit:
With this kit you can save electricity on your home's electric bill, during sunny hours everything that the solar panels produce will be injected into your home and power the electrical appliances for free.
This kit does not need permits from any electrical company to be installed, since its “zero discharge” system into the electrical grid does not allow anything to be dumped, and in this way we save ourselves from any legal paperwork.
