The New VM IV 5600W 48V Hybrid Inverter is a very versatile all-in-one device. It is aimed at uses in isolated installations to work on Batteries of 48V. It offers up to 5.6KW of power output and allows us to connect panels to work in a hybrid way.
VM Manual IV-3600/VM IV5600 ING
Video communication with Pylontech battery
Hybrid Inverter 5.6KW 48v Mppt 120A/500V VM IV-5600. It is a further step in the range of domestic models of the Voltronic Axpert range thanks to integrating an inverter charger along with a regulator prepared to work at high panel voltage. It offers up to 5.6KW of output power, supports up to 6000W to connect panels, work with or without batteries of any type at 48V and can have Bluetooth connectivity to monitor from our smartphone
With hybrid inverters of the VM2 and VM3 series it is recommended to use AC stabilizer for use with a generator set.
Features of the 5.6KW 48v Mppt 120A/500V Hybrid Inverter VM IV-5600
The 35.6KW 48v Mppt 120A/500V VM IV-5600 Hybrid Inverter offers a series of features
interesting compared to its competition such as the following:
- Removable screen Touch button with 4,3″ color LCD screen
- WIRELESS integrated. We can see the inverter parameters from a distance on our smartphone with Android system through the WatchPower app.
- Communications port for BMS. It has a communications port that supports the RS-485, CAN-BUS and RS-232 protocols to be able to communicate with lithium batteries that incorporate their BMS so that the inverter has the energy readings provided by the battery.
- Battery equalization. To extend the useful life of lead acid batteries, this functionality allows you to eliminate the sulfation that is generated in the plates of this type of accumulators, whether they are monobloc open lead acid batteries or OpzS stationary batteries.
- Possibility of operation without battery. Through this functionality, the inverter can be connected to the panels and the incoming electrical network and directly to the consumption without the need to have a connected battery. The consumptions connected to the inverter will be powered directly from the two connected external sources without the need for a battery to be present.
- Easy ventilation repairability. Since most physical problems can appear due to failures in the ventilation system, the possibility of replacing the fans is facilitated without having to disassemble the unit for easier maintenance.
Installation Inverter 5.6KW 48v Mppt 120A/500V VM IV-5600
To provide maximum protection for both the inverter and the system in general, we recommend installing a Protection and Pre-Installation Kit. The installation of this model of 5.6KW 48V hybrid inverter is simple with your pre-installation kit, however at Wccsolar we recommend that the 5.6KW 48v Mppt 120A hybrid inverter be installed by a photovoltaic professional, or that the installation instructions be strictly followed. to avoid bad connections and breakdowns due to incorrect installation.
Buy Inverter 5.6KW 48v Mppt 120A/500V VM IV-5600
Buying the 5.6KW 48v Mppt 120A/500V VM IV-5600 hybrid inverter is fast, safe and comfortable thanks to Wccsolar, and the 5.6KW 48v Mppt 120A/500V VM IV-5600 hybrid inverter has an official Wccsolar guarantee.
Contact to receive more information.
2 years warranty
Data sheet
-Model: 5.6kW VM IV 48V
– Rated power: 5600W.
– Input voltage: 48V.
– Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for home appliances).
– Frequency range: 50Hz/60Hz (automatic detection).
– Output voltage regulation (battery mode): 230 VAC +-5%
– Maximum power (starting peaks): 7200W.
– Efficiency: 90-93%.
– Transfer time: 10 ms (for computers) 20 ms (for home appliances).
– Wave type: Pure sine wave.
– Maximum voltage of the photovoltaic panel open circuit 500VDC
– Battery voltage: 48V.
– Float charging voltage: 54V.
– Overload protection: 63V.
– MPPT regulator charging current: 120A.
– RED charging current: 100A.
– Power consumption in stand-by: 10W.
– Measurements: 120 x 314 x 423 mm
- Weight: 12Kg.
Features
Precautions
With hybrid inverters of the VM2 and VM3 series it is recommended to use AC stabilizer for use with a generator set.
