Huawei Three-Phase Inverter Sun2000-36KTL M3

Description

The Huawei SUN2000-36KTL inverter is an intermediate model within the range of KTL Huawei three-phase grid connection inverters within the range of three-phase inverters of this manufacturer, with the smallest inverter being 3.000W and the largest being 200.000W. The Huawei SUN2000-36KTL inverter is prepared to be installed in those photovoltaic installations in which the home also has a connection to the electrical grid, so that the home's consumption during the daytime hours when the panels receive solar radiation will take The energy source provided by the panels is the energy source, while the nighttime hours or daytime consumption on days when there is little or no solar radiation will be taken as the energy source provided by the electrical grid. In this way, the Huawei SUN2000-36KTL inverter offers significant savings on the electricity bill for those homes that make their usual consumption during daylight hours. The Huawei SUN2000-36KTL inverter is prepared for those grid connection installations that do not have batteries.

English Technical Sheet

English Manual

Spanish Technical Sheet

Spanish Manual

Installation guide HuaWei inverter to HUAWEI 30KTL – 40KTL M3 inverters

Install Huawei SUN2000-36KTL Three-Phase 36kVA Inverter

The SUN2000 app allows the inverter to communicate with the monitoring system via USB data cable or Bluetooth to query alarms, configure parameters, and perform routine maintenance tasks. The SUN2000 application is a convenient platform for local monitoring and maintenance.

It is important to keep in mind that this is a system compatible with the mobile phone: Android 4.0 or later and iOS 7.0 or later. When using iOS, the app only supports Bluetooth connection, so depending on the type of smartphone, connect a USB data cable or Bluetooth module to the USB port of the inverter to establish communication between the inverter and the app.

To download the application, visit the Huawei App Store (http://appstore.huawei.com), Google Play (https://play.google.com) or App Store (iOS), search for SUN2000 and download the application package. installation of the SUN2000 application.

Buy Huawei SUN2000-36KTL Three-Phase 36kVA Inverter

Trust only those companies that offer a guarantee on all products, such as Wccsolar. In this case, the warranty on the Huawei SUN2000-36KTL inverter is 5 years as long as the product has been used following the recommendations, maintenance and respecting the compatibility established by the manufacturer.

Buying the Huawei SUN2000-36KTL inverter is easy, fast and safe through Wccsolar, consult the technical sheet and installation manual for more information, if you have any questions about the compatibility, installation, connection, etc. of the Huawei SUN2000-36KTL inverter, contact us and our technical department will advise you without obligation.

Technical Specifications

Efficiency

• Maximum efficiency 98.8% @480 V; 98.6% @380V / 400V
• Weighted European efficiency 98.6% @480 V; 98.4% @380V / 400V

Entry

• Maximum input voltage 1,100 V
• Maximum input current per MPPT 22 A
• Maximum short circuit current 30 A
• Starting voltage 250 V
• Operating voltageMPPT 200 V ~ 1,000 V
• Nominal input voltage 620 V @380 Vac/ 400 Vac; 720V @480Vac
• Number of MPPTs 4
• Maximum number of entries per MPPT 8

Departure from

• Active power 36,000 W
• Max. AC Appearance Power 40,000 VA 3
• Max. AC active power (cosφ = 1) Default 40,000 W; 36,000 W optional configuration
• Rated output voltage 220 V / 380 V, 230 V / 400 V, default 3W + N + PE; 3W + PE optional in 277 V / 480 V, 3W + PE configuration
• Nominal AC mains frequency 50 Hz / 60 Hz
• Nominal output current 54.6 A @380 V, 52.2 A @400 V, 43.4 A @480 V
• Max. Output current 60.8 A @380 V,57.8 A @400 V,48.2 A @480 V
• Adjustable power factor 0,8 capacitive … 0,8 inductive
• Maximum total harmonic distortion＜3%

Protecciones

• Input side disconnect device Yes
• Anti-island protection Yes
• AC overcurrent protection Yes
• DC reverse polarity protection Yes
• String level monitoring Yes
• Type II DC Surge Arrester
• Type II AC Surge Arrester
• DC insulation resistance detection Yes
• Residual current monitoring Yes

Communication

• Display IndicatorsLED, Bluetooth + APP
• RS485 Yes
• USB Yes
• BUS Monitoring (MBUS) Yes (isolation transformer required)

General data

• Dimensions (W x H x D) 930x 550x 283 mm
• Weight (including mounting bracket) 62 kg
• Operating temperature range -25°C ~ 60°C
• Cooling Natural convection
• Max. Operating altitude 4,000 m
• Relative operating humidity 0 ~ 100%
• Amphenol Helios H4 DC Connector
• AC Connector Waterproof PG Terminal + OT Connector
• Degree of protection IP65
• Transformerless Topology
• Nighttime power consumption <2.5W
• Standards compliance (more options available upon request)

Security

• EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
• Electrical grid connection standards
• IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699,
• PO 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7, NRS 097-2-1, AS/NZS 4777.2

Huawei Solar FusionSolar APP

We inform you that the Huawei Solar's FusionSolar APP is not available on Google Play (Android). 

From now on, to be able to monitor and configure Huawei settings through the FusionSolar APP you must download the application from Huawei's AppGallery. 

AppGallery (Android) It is the platform to acquire Huawei mobile applications. Through the link you have to download the APK file of the application for installation.  

we leave download option:

Link:             Click here to download