Huawei Three-phase Inverter SUN2000-150KTL MG0

Description

English Technical Sheet

English Manual

Spanish Technical Sheet

Spanish Manual

Installation Guide for HuaWei Inverters to HUAWEI 150KTL MG0 Inverters

Install Huawei SUN2000-150KTL-MG0 Inverter

The SUN2000 app allows the inverter to communicate with the monitoring system via USB data cable or Bluetooth to query alarms, configure parameters, and perform routine maintenance tasks. The SUN2000 application is a convenient platform for local monitoring and maintenance.

It is important to keep in mind that this is a system compatible with the mobile phone: Android 4.0 or later and iOS 7.0 or later. When using iOS, the app only supports Bluetooth connection, so depending on the type of smartphone, connect a USB data cable or Bluetooth module to the USB port of the inverter to establish communication between the inverter and the app.

To download the application, visit the Huawei App Store (http://appstore.huawei.com), Google Play (https://play.google.com) or App Store (iOS), search for SUN2000 and download the application package. installation of the SUN2000 application.

Buy Huawei SUN2000-150KTL-MG0 Inverter

Only trust those companies that offer a guarantee on all products, such as Wccsolar. In this case, the warranty on the Huawei SUN2000-150KTL-MG0 inverter is 5 years provided that the product has been used following the recommendations, maintenance and respecting the compatibility established by the manufacturer.

Buying the SUN2000-150KTL-MG0 inverter is easy, fast and safe through Wccsolar. See the technical sheet and installation manual for more information. If you have any questions about the compatibility, installation, connection, etc. of the Huawei SUN2000-150KTL inverter, contact us and our technical department will advise you without obligation.

Technical Specifications

Efficiency

• Maximum efficiency 98.8% @480 V; 98.6% @380V / 400V
• Weighted European efficiency 98.6% @480 V; 98.4% @380V / 400V

Tickets

• Max. Input Voltage 1 1,100 V
  Max. Current per MPPT 48A
  Max. Current per Input 23A
  Max. Short Circuit Current per MPPT 66A
  Start Voltage 200 V
  MPPT Operating Voltage Range 2 200 V ~ 1,000 V
  Number of MPP trackers 7
  Max. input number per MPP tracker 3

Departure from

• AC Active Power Rating 150,000 W
  Max. AC Apparent Power 165,000 VA
  Max. AC Active Power (cosφ=1) 165,000 W
  Nominal Output Voltage 380V/400V/480Vac
  Rated AC Grid Frequency 50 Hz / 60 Hz
  Nominal Output Current 227.9 A @380 V, 216.5 A @400 V, 180.4A @480Vac
  Max. Output Current 253.2 A @380 V, 240.5 A @400 V, 200.5A @480Vac
  Adjustable Power Factor Range 0.8 leading… 0.8 lagging
  alternating current THDi＜1%

Protecciones

• Input side disconnect device Yes
• Anti-island protection Yes
• AC overcurrent protection Yes
• DC reverse polarity protection Yes
• String level monitoring Yes
• Type II DC Surge Arrester
• Type II AC Surge Arrester
• DC insulation resistance detection Yes
• Residual current monitoring Yes

Communication

• Display IndicatorsLED, Bluetooth + APP
• RS485 Yes
• USB Yes
• BUS Monitoring (MBUS) Yes (isolation transformer required)

General data

• Dimensions (W x H x D) 1,048 x 732 x 395 mm
• Weight (including mounting bracket) ≤112 kg
• Operating temperature range -25°C ~ 60°C
• Cooling Natural convection
• Max. Operating altitude 4,000 m
• Relative operating humidity 0 ~ 100%
• Amphenol Helios H4 DC Connector
• AC Connector Waterproof PG Terminal + OT Connector
• Degree of protection IP65
• Transformerless Topology
• Nighttime power consumption <2.5W
• Standards compliance (more options available upon request)

Security

• EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
• Electrical grid connection standards
• IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699,
• PO 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7, NRS 097-2-1, AS/NZS 4777.2

Huawei Solar FusionSolar APP

We inform you that the Huawei Solar's FusionSolar APP is not available on Google Play (Android).

From now on, to be able to monitor and configure Huawei settings through the FusionSolar APP you must download the application from Huawei's AppGallery.

AppGallery (Android) It is the platform to acquire Huawei mobile applications. Through the link you have to download the APK file of the application for installation.

we leave download option:

Link:             Click here to download