Hybrid inverter 5.5KW 48v MPPT 90A/450V REVO

    550,00 (VAT included)

    10 in stock

    Description

    ING Manual

    ESP Manual

     

    We present the PlusEnergy REVO-E II 5500w 48v mppt 90 hybrid inverter, it is an inverter that works as OFF Grid and On Grid (RED or Isolated injection) with input solar up to 450 volts . The new hybrid inverter model allows operation with and without batteries. Only by connecting the solar panels to the hybrid inverter we will have a 230v output to be able to carry out self-consumption installations, power pumps or function as a pure wave inverter in isolated installations. The power factor is 1 so the equipment delivers a real 5500w NOT parallelizable

     

    • Works without batteries.

    • Self-consumption and power supply to the grid With or without batteries.

    • Programmable supply priority for Solar Panel, Battery or Grid

    • User adjustable charging current and voltage

    • Multiple programmable operating modes: on-grid, off-grid, and on-grid with backup

    • Monitoring software for real-time status visualization and control

    5500W 48V inverter charger, with 90A MPPT special for photovoltaic solar kitsIt is a pure sine wave inverter with a 60A battery charger and a 90A MPPT solar regulator with a DC 450V input integrated into a single device. It is one of the best solutions on the market today, since it is capable of managing the load of solar, the load of the batteries, and it also has a battery charger, which allows you to charge them from a gasoline generator set or from the electrical grid in the event that the solar panels are not capable of supplying the necessary energy. The function of hybrid Solar inverters is not to pass current through the batteries throughout the day, but rather to use the energy they provide. The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.

     

     

    The battery is charged during the day with the surplus production that we do not use, which is the power figure that we see on the screen.

     

    The inverter is capable of generating a pure sine wave, with the same characteristics as that created by the conventional electrical grid.

     

    All of this can be view using the LCD display. which is included in the Voltronic Solar Inverter housing. In addition, the equipment from the manufacturer Voltronic Solar allows the programming of the operating parameters of the installation, as well as the connection via Wifi to be able to monitor it from any computer through a web page.

     

    Operating diagram:
    If it is at night, on a cloudy day, or if there is a demand for energy greater than what the panels can provide, the necessary energy is provided by the battery bank. If, for example, at 12:00 noon we are producing 1.500W with the solar panels, and the home consumes 500W at that time, we will be charging the batteries with the remaining 1.000W, in order to have supply during the night.

     

    Installation of 5.5KW REVO-48V hybrid inverter

    In order to provide maximum protection for both the inverter and the system in general, we advise you to put a Protection and pre-installation kit. The installation of this model of 5.5KW 48v hybrid inverter is simple with your pre-installation kit, however at Wccsolar we recommend that the 5.5KW 48v hybrid inverter be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.

     

    Buy 5.5KW REVO-E 450V hybrid inverter

     

    Buy the 5.5KW 48v hybrid inverter It is fast, safe and comfortable thanks to Wccsolar, plus the 5.5KW 48v hybrid inverter It has an official Wccsolar guarantee.

     

    Contact us to receive more information.

     

    2 years warranty

    Data sheet

    – Model:5.5KW REVO-E 450V

    - Nominal power: 5500W.
    – Input voltage: 48V.
    – Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for home appliances).
    – Frequency range: 50Hz/60Hz (automatic detection).
    – Output voltage regulation (battery mode): 230 VAC +-5%
    – Maximum power (starting peaks): 11.000W.
    – Efficiency: 93%.
    – Transfer time: 10 ms (for computers) 20 ms (for home appliances).
    – Wave type: Pure sine wave.

    – Maximum voltage of the photovoltaic panel open circuit 450VDC
    – Battery voltage: 48V.
    – Float charging voltage: 54V.
    – Overload protection: 60V.

    – PV Rated power: 4500W.
    – Regulator charging current: 90A MPPT.
    – Charger charging current: 60A.
    – Power consumption in stand-by: 10W.

    – Measurements: 141 x 295 x 528mm
    - Weight: 12.5 Kg.

     

     

    Characteristics

    5.5kw 48v MPPT Hybrid Inverter concentrates three powerful devices in a single unit. In this way, the operation of the entire solar installation can be regulated and controlled from a single screen.

    This 5.5V MPPT 48Kw model includes:

     

    – A 5500W 48V pure sine wave inverter:

    Pure wave inverter of 5500W nominal power with maximum power for several seconds of 11000W, to cover high starting peaks of some appliances with a motor. This inverter can be used for all types of electrical devices as long as the nominal use power of 5500W is not exceeded. It is recommended for the operation of a refrigerator, freezer, television, washing machine, coffee maker, grill, microwave, dishwasher, lighting, small appliances such as blender, juicer, coffee maker, fan, computer, printer, audio or DVD player, drill, etc.

    The Omega screen allows you to view the real power of the devices that are connected to the solar installation. This screen also indicates the percentage of use of the inverter according to the demand to which it is made to work at any given time.

     

    – A 90A MPPT maximizing regulator:

    Each unit includes a large MPPT charge regulator that allows up to 80 amps in 24V panel capacity. Whether they are isolated panels: with a power between 150 to 330W, or network (MPPT): panels with a power equal to or greater than 250W. The regulator is the default screen of the 5kw 48v MPPT Hybrid Inverter and allows you to control the battery charge level at all times.

    The regulator can be configured depending on the type of battery installed: acid (monoblock or stationary solar) or agm/gel. In this way, charging is precise and the useful life of the battery is extended. It also allows you to configure the three charging stages: raw charge, absorption and float.

     

    - A 60A battery charger:

    The battery charger allows you to power the solar installation with external support energy through the use of a generator or generating set. This charger can be configured to allow power to pass through once the batteries drop to a marked discharge level. In this way, with the use of an automatic generator (or energy from the grid), it will automatically start up, becoming a completely autonomous solar installation.

    This advanced charger uses multiple stages to quickly recharge batteries. Thanks to these recharges, the battery never drops below a certain charge level, which prolongs its life cycle.

    The use of a charger is ideal to cover high consumption peaks in facilities where there are specific days with consumption much higher than usual. In this way, consumption is covered and it is avoided having to oversize the solar installation for this reason.

     

     

    Other outstanding features:

    – Offers configuration of charging priority according to its origin (solar / electric company or generator), as well as priority of the origin of the output power (solar / electric company / solar-battery-electric company).

    – The charger has a wide voltage range as well as a filter to regulate the wave oscillations of older generators. Thus it can be used to connect all types of generating sets as well as the electrical network itself.-Automatic restart while the AC is recovering.

    - Protection against overload and short circuit.

    – Intelligent battery charger design to optimize battery performance.

    – Cold start function.

     

    Open chat
    1
    Hi
    How can we help?