Victron EasySolar Inverter 48V 3000VA Charger 35Amp MPPT 150V 70Amp
All-in-one solar energy solution
El EasySolar inverter charger 48V 3000VA/35 MPPT 150/70 Color Control combines an MPPT solar charge controller, inverter/charger and AC distributor in one device. The EasySolar installs easily, with minimal wiring.
All-in-one solar energy solution
El EasySolar combines an MPPT solar charge controller, inverter/charger and AC distributor in one device. The product installs easily, with minimal wiring.
Features Victron Energy Easy Solar 3000W 24V Regulator Charger Inverter with 150V 70A MPPT Regulator and Victron Color Control GX screen
La investor part It has a power of 3000VA (2400W) with connection to 48V batteries. The wave generated by the inverter is a pure sine wave, which allows the correct operation of all the equipment in a home such as televisions, lights, washing machines, etc. The inverter emits pure sine current 230V single-phase through a large coil of copper, which guarantees a longer life of the device, given that the way of emitting the current is mechanical, which minimizes failures of electrical components.
La battery charger part, it is a 48V charger capable of supplying the batteries with a maximum current of 35A per hour of operation. Through the battery charger, we can charge the batteries using an external energy source to the solar installation, very useful when there are rainy and cloudy days, where the solar panels are not capable of supplying the energy requested by the home or by the consumer. Through the battery charger input, the 3000VA 48V Easy Solar is capable of charging the batteries through a gasoline or diesel generator or from the electrical grid.
La charge regulator part, incorporates 1 MPPT charge regulator with a maximum voltage of 150V and a maximum current of 70A, thus allowing you to have up to 4000W of solar panels without the need to purchase any additional regulator, which means a total photovoltaic field power of 4000W, therefore which we can install about 12-13 330W panels, which are currently among the most powerful in the 24V range. We can also install grid connection panels, for example 270W, that although the inverter is 48V, the MPPT charge regulator will adjust the appropriate voltage. If we put 270W solar panels we can install about 14-15 solar panels connected in trios.
The function of the victron Easy Solar 3000Va 48V is to combine an MPPT charge controller with an inverter charger and an alternating current distributor in just one device. Said inverter is installed very easily since it has all the pre-installed connections at the bottom of it to be able to arrive with MC4 terminals from the panels and leave with a single alternating current cable.
The victron Easy Solar 3000Va 48V has two connections in that panel for the input of the solar panels, that is, we can connect up to two chains of panels in our photovoltaic system as long as we do not exceed the 150V maximum voltage of the panel field that the regulator allows us.
The complete connection diagram of the Easy Solar 48V 3000VA inverter can be seen below, since in addition to being able to connect the solar panels and batteries, we can monitor all the values of the installation through the Color Control that is included Victron Color Control GX , knowing in this way the amount of energy we are producing, the amount of energy we are consuming as well as the remaining autonomy of the battery at all times:
About the victron Easy Solar 3000Va 48V charger inverter share the battery cables that are already included in the inverter itself. The batteries can be charged in two different ways, the main one is through solar energy through the MPPT regulator and if this is not enough we can supply it with the battery charger also integrated into the inverter. The battery charger will power the system batteries using a generator or the electrical grid.
The Victron Easy Solar 3000Va 48V AC power distributor consists of an RCD and four AC outlets protected by two 10A and two 16A circuit breakers. One of the 16A outputs is controlled by the AC input which will activate when AC power is available.
The Victron Easy Solar 3000Va 48V is equipped with a special Victron technology called Power Assist that allows powering the grid or generator from an overload by adding additional power from the inverter when needed.
In addition to all these advances, the inverter has exclusive software for solar applications where through a computer program we can configure the system for both autonomous and grid-connected applications. This software can be consulted in the link attached below:
Technical sheet Victron Energy Easy Solar 3000W 48V Inverter Charger Regulator with MPPT Regulator 150V 70A and Victron Color Control GX screen
Contact us to receive more information.
EasySolar Manual 3000va/5000va 24v/48v
Editorial Board
Victron EasySolar 48V 3000VA inverter
It is the all-in-one option offered by Victron, this inverter is equipped with 2 35A MPPT charge regulators, with a maximum input voltage of 150V, it also has a 35A battery charger and a 3000VA at 48V inverter. It is equipped with its fuses and switches to be able to power one outlet or another depending on our needs. The necessary components to be able to make a solar installation using the Victron Easy Solar 3000VA 48V, with 2 charge regulators of 150V and 35A are the solar panels, the Victron Easy Solar inverter and the batteries. As an optional complement we can include the solar panel structures and the monitoring system of the Victron Color Control GX solar installation.
