Pumping Kit 1800w / 2.3cv Max. flow. 10000 Liters/hour Height 146 ​​meters

    2.395,00 (VAT included)

    This Kit includes

    SKU: KIT4SSC1800/10 Categories: ,

    Description

    El 1800w solar pumping kit (2.3CV) has been designed for irrigation or pumping wells for heights of up to 146 meters and a water flow that will vary from 1000 to 10000 liters per hour depending on the height to which the water needs to reach . This pump will have a full overall operation of 8 hours in summer and 6 hours during the winter season.

     

    La solar water pump works directly with solar during the day, when its amperage is sufficient for the pump to start. Its operation is at one hundred percent performance during the midday hours, which is when water will be most needed for livestock or for irrigation of agricultural fields. The pump is a permanent magnet so it does not require maintenance. Thanks to Brushless Motors The useful life of the brushless motor is longer: since it does not have brushes, there is no friction that generates wear or noise, and continuous maintenance is not necessary.

     

    Submersible pumping kit installation

     

    At Wccsolar, the installation of this Submersible pumping kit is recommended that be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.

     

    This Solar Kit is compatible with the following structures:

    Perforating Roof Structures They are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the screws and accessories are made of stainless steel.

    Sheet Sandwich Roof Structures  with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.

    Structures Flat or little inclination Designed to be able to anchor the solar panels to the ground, whether on a flat roof on top of a building or on the ground, we have several angles of inclination to be able to adapt all the structures to the needs that arise in each case.

     

    Buy Submersible pumping kit

     

    Buy the Submersible pumping kit It is fast, safe and comfortable thanks to Wccsolar, and the Submersible pumping kit has an official Wccsolar guarantee.

     

    Contact us to receive more information.

     

    Informative operating video HERE

     

    4SSC 10/1800/110 ING pump manual

    4SSC 10/1800/110 ESP pump manual

    Presentation Video Parameters 

     

    CATALOG OF ALL TYPES OF SOLAR PUMP

    4SSC 10/1800/110 pump characteristics

    • Height: max. 146 meters.
    • Flow: max. 10 m3/h (10000 liters/hour).
    • Input voltage: 110V
    • Efficiency: 98%.
    • Protection mode: IP54
    • Minimum diameter of the well: 14 cm.
    • Pump diameter: 95mm
    • Rated motor power: 1800W.
    • Protection mode. IP68.
    • Pump outlet socket: 1.5 inch section
    • Weight:22KG
    • Way to connect 3 Parallels of 3 series Total 9 panels (300w 310w 320w 330w) 72 Cells
    • 2 year warranty
    • Total height of Pump 71cm
    • Pump Diameter 10cm

     

    Open chat
    1
    Hi
    How can we help?