1.755,00€ (VAT included)
This Kit includes
The Belenus 2,5 70m-16 solar pumping kit has been designed for irrigation or well pumping for heights of up to 70 meters and a water flow that will vary from 1000 to 16000 liters per hour depending on the height at which it is needed. reach the water. This pump will have a full overall operation of 8 hours in summer and 6 hours during the winter season.
BELENUS Submersible Pump functions following three ways:
-Solar panels DC current
-AC Current Generator
-Alternating Current 220VAC
Adaptable to any situation
Pump interior is designed the same as Grundfos to adapt to the vast majority of pumping conditions, whether it is one with a lot of flow or if, on the other hand, the unevenness is very high.
That is why we have products that range from 5 meters to 180 meters high and from 220l/h to 15.200l/h.
All this without giving up efficiency, making the most of the connected photovoltaic power.
Automatic tank filling control
We have simplified the tank filling control system thanks to our automatic controller. With it, the system will automatically control when to start or stop depending on the capacity of the tank.
In addition, it allows the connection of alternating current for the use of a generator that can be started and stopped completely automatically.
Dry well protection
There are two very important variables to control that the pump stops before the well runs completely dry: The first is for the protection of the pump itself. The second to preserve the well. That is why at Acrosun we have developed the StopFlow system with which the pump automatically interrupts its operation.
In this way we manage to significantly extend the life of both parts.
Direct Current or Alternating Current With the same wires!
Only 3 wires to operate this pump, and one of them is the ground connection, and with them, we can power the pump with both direct current and alternating current. Yes, it seems incredible. In this way we cover the need to maximize the options when operating a solar pump.
Stainless Steel Body
Our product is made with the most resistant materials. The entire set is made of 304 Stainless Steel.
Wide voltage range
Between 60 and 380 volts is the operating range of our equipment, vital to make the most of the photovoltaic field.
Up to 43.200 liters/hour
We have equipment capable of providing a flow of up to 43.200 liters/hour. Something incredible considering the power in panels needed for this.
Encapsulated electronics
The reason for the simplicity of the system when it comes to operation and installation lies in the pump itself. That's where the brain lies. An intelligent electronic system whose work is essential. Everything protected within the motor body itself.
FUNCTIONALITIES OFFERED BY THE UControl-250x CONTROLLER:
• Selection of power input source. In AC mode, the power supply
incoming can be the connection to the grid or generator.
• Selection of power input source. In DC mode, the power supply
input can be solar panels or batteries. DC is the default power supply.
• Button to switch between automatic mode, AC mode, DC mode.
• Pump on and off control.
• Protection against high voltages. The pump motor will turn off when the range AC>265V.
• High voltage protection. The pump motor will turn off when DC>480V.
• The pump stops its operation when the controller sensor detects that it is
full. Likewise, when the water level drops, the pump starts again.
Installation of Plus Energy submersible solar pump
At Wccsolar the installation of this Plus Energy submersible solar pump is recommended that be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.
Buy Plus Energy submersible solar pump
Buy the Plus Energy submersible solar pump It is fast, safe and comfortable thanks to Wccsolar, and the Plus Energy submersible solar pump has an official Wccsolar guarantee.
Contact us to receive more information.
Controller Technical Data Sheet
Technical data
– P1 power: 2,8kW max.
– DC range: 60-380 VDC
– AC range: 90-240 VAC
– Max. Current: 10A
– Max. Flow: 16,2 m3/h
– Max. Height: 70m
– Engine: 4″
– Outlet: 2″
– Speed: 3600 rpm
- Weight: 16 Kg
- Height: 0,96 m
– Protection degree: IP68
– Liquid to pump: Water
– Maximum liquid temperature: 36ºC (96,8ºF)
– Immersion depth: 150 m
– Certifications: TUV, CE, UL
Details of the product
– The manufacturing material of the engine and the body of the
pump is AISI 304 stainless steel.
– Three 3-wire wiring: (Earth + Pole 1 + Pole 2) Without
Defined polarity for easy installation.
– 2,5HP motor – Centrifugal pump.
– StopFlow pump protection system
FEATURES OF THE UControl-250x CONTROLLER:
• Possibility of manual or automatic configuration.
• Automation of tank filling.
• Direct irrigation automation.
• Possibility of using a generating set or photovoltaic panels.
• LED indicators for full or empty tank.
• Weather resistant (avoiding direct sunlight).
Frequency: 50 60-Hz
Power: 60V-38Vmp
AC range: 90-240V
