3.550,00€ (VAT included)
This kit includes:
Kit Solar 48v 2700w 5K Hybrid Inverter with 5.1KWh Lithium Batteries PlusEnergy LP18-48100 48V
6 panels: 2700w
7 panels: 3150W
8 panels: 3600W
9 panels: 4050W
1-Battery 5.1 kWh.
2-Batteries 10.2 kWh.
3-Batteries 15.3 kWh.
.
High-performance solar kit for demanding consumption in the home. It is equipped with high-end multiplus equipment, which allows perfect control of the entire installation from a single device. This multiplus has a battery charger as an extra, which allows a significant margin of use since the battery charger will cover any excess consumption that you may have in your home. This kit has been sized for consumption of a combi refrigerator (fridge + freezer), television, dishwasher, lighting, DVD player, microwave, water pump, washing machine (hot use), laptop, air conditioning, etc.
PRO ON/OFF GRID Manual Spanish
Manual PlusEnergy LP18-48100 48V Ingres
Manual PlusEnergy LP18-48100 48V Spanish
Thanks to isolated lithium batteries we obtain the advantage of maintaining their discharge up to 6.000 cycles compared to conventional Opzs or similar batteries. Lithium batteries, unlike conventional ones, maintain their charge at 100% (20 years)
This isolated Solar kit 48v 2700w It allows us to have electricity where the electrical network does not reach or for any reason we do not want to resort to electrical companies. This home kit or isolated installation solar kit from Wccsolar includes solar panels with many years of warranty. We have isolated solar kits, as well as solar kits of all types, among them are solar grid connection kits, solar pumping kits and solar pool purification kits.
This Kit gives us approximately 2700w/hour of energy making a calculation per day in winter about 4 hours gives us 9000w/day and in summer about 7 hours 19000w/day.
Isolated Solar kit installation 48v 2700w
At Wccsolar, the installation of this 48v 2700w isolated solar kit is recommended that be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid poor connections and breakdowns due to incorrect installation.
This Solar Kit is compatible with the following structures:
Structures Perforating Roof are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the screws and accessories are made of stainless steel.
Structures Sandwich sheet metal roof with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Flat or low inclination structures designed to be able to anchor the solar panels to the ground, whether on a flat roof on top of a building or on the ground, we have several angles of inclination to be able to adapt all the structures to the needs that arise in each case.
Buy isolated Solar kit 48v 2700w
Buy the 48v 2700w isolated solar kit It is fast, safe and comfortable thanks to Wccsolar, and the 48v 2700w isolated solar kit has an official Wccsolar guarantee.
PROPER USE OF 5.1kWh PlusEnergy LP18-48100 48V Lithium Batteries
Float Voltage: 57v
Charging Voltage: 57v
Under protection voltage: 44v
Contact us to receive more information.
Component Description:
Technical Data Sheet PH18-5248 PRO
WAVEFORM: Pure sine wave
AC Voltage Regulation (Batt.Mode): 230VAC±5% (Settings)
Inverter efficiency (peak): 90%~93%
Transfer time: 10ms (SAI\VDE4105) 20ms (APL)
AC INPUT
Voltage: 230VAC±5%
Selectable voltage range: 170~280 VAC (UPS) \ 90~280 VAC (APL)
Frequency range: 50Hz/60Hz (auto detect)
DRUMS
Normal voltage: 48 VDC
Float charge voltage: 54,8VDC
Overload protection: 60 VDC
SOLAR CHARGER AND AC CHARGER
Maximum open circuit voltage of PV array: 450 VDC
Maximum power of photovoltaic array: 5000W
Photovoltaic array MPPT voltage range: 150~430 VDC
Maximum solar charging current: 80A
Maximum AC charging current: 60A
Maximum load current: 80A
MECHANICAL SPECIFICATIONS
Machine dimensions (W x H x D) (mm): 330*488*119
Package Dimensions (WxHxD) (mm): 396*638*241
Net weight (kg): 14KG
Gross weight (kg): 16,4KG
OTHER
Humidity: 5% to 95% Relative humidity (non-condensing)
Operating temperature: – 10℃ ~50℃
Storage temperature: – 15℃ ~60℃
Technical Specifications Battery LP-18-48100
