Description
Active arc flash protection powered by AI
Compatible with SUN2000-450W-P optimizer
Battery ready by direct plug & play, no additional device or any modification required
Models from 2KW to 10KW, both single-phase and three-phase, have a 5KW LUNA battery charging function.
High efficiency inverter topology, max. Efficiency 98,4%
This HUAWEI Self-Consumption Kit gives us approximately 10Kw/hour of energy savings, making a calculation per day in winter about 4 hours gives us 40000w/day of savings and in summer about 7 hours 70000w/day of savings.
Three-phase system type: 400V AC
Photovoltaic Solar Power: 10800W
Maximum output power to home: 10000W
AVERAGE daily annual production: 43.2 KWH day
Technical Data Sheet 3KTL-10KTL M1
Huawei 3 KTL-10KTL M1 Manuals
Installation Manuals 3 KTL-10KTL M1
Installation Guide HuaWei Inverter for Luna 2000 Batteries
Installation guide HuaWei inverter to HUAWEI 3KTL – 10KTL M1 inverters
This Solar Kit is compatible with the following structures:
Perforating Roof Structures They are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the screws and accessories are made of stainless steel.
Sheet Sandwich Roof Structures with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Structures Flat or little inclination Designed to be able to anchor the solar panels to the ground, whether on a flat roof on top of a building or on the ground, we have several angles of inclination to be able to adapt all the structures to the needs that arise in each case.
Characteristics of the SUN2000L-10KTL Self-Consumption Inverter
The SUN2000L-10KTL Self-consumption inverter has 2 MPPT trackers, which means that we can have 2 different orientations for our photovoltaic field without affecting the production of one over the other. The SUN2000L-10KTL Self-consumption inverter has an extremely low range for starting its internal regulator. The working range of its regulator is between 140 and 980V, so with 5 panels of 72 cells it can be started. It has a high limit on its working voltage, so we can use any type of panel as long as we respect the ranges set by the manufacturer.
This inverter has an integrated signal repeater that allows communication between inverters thanks to the fact that the Wi-Fi signal is transferred from one SUN2000L-10KTL Self-consumption inverter to another. This is very interesting for large photovoltaic installations that require several inverters and that would otherwise limit communication between them.
This inverter is compatible with the Chint Three-phase wattmeter. To confirm compatibility with other wattmeters, contact us or consult the technical sheet in each case.
The AutoconsumoSUN2000L-10KTL 1000W inverter offers great operating efficiency of more than 98% and has the best expansion capabilities at the best price. Even though it is a grid-connected inverter.
Component Description:
- Detailed information about investors HERE
Contact us to receive more information.
Technical Data Sheet 10kw Huawei Inverter
EFFICIENCY:
- Maximum Efficiency 98.6%
- European efficiency 98.1%
INPUT
- Recommended maximum DC input 14,880 Wp
- Max. input voltage 1 1,100 V
- MPPT 2 operating voltage range 140V ~ 980V
- Minimum input voltage 200 V
- Maximum power voltage range
- MPPT 470V~850V
- Rated input voltage 600 V
- Max. intensity per MPPT 11 A
- Max. short circuit current per MPPT 15 A
- Number of MPP 2 trackers
- Max. number of inputs per MPPT 1
PROJECTION
- Connection to electrical network Three phases
- AC active power rating 10,000 W
- Max. AC apparent power 11,000 VA
- Nominal Output Voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 3W / N+PE
- Nominal AC mains frequency 50 Hz / 60 Hz
- Max. output current 16.9 A
- Adjustable power factor 0,8 capacitive … 0,8 inductive
- Max. total harmonic distortion ≤ 3%
FEATURES AND PROTECTIONS
- Input side disconnect device: Yes
- Anti-island protection: Yes
- DC reverse polarity protection: Yes
- Insulation monitoring: Yes
- DC Lightning Protection: Yes
- AC Lightning Protection: Yes
- Residual current monitoring: Yes
- AC overcurrent protection: Yes
- AC short circuit protection: Yes
- AC surge protection: Yes
- Protection against electric arc: Yes
- Ripple Receiver Control: Yes
- DC MBUS to optimizer: No
GENERAL INFORMATION
- Operating Temperature Range: -25 ~ +60°C (Derating above 45°C @ Rated Output Power)
- Relative operating humidity 0%RH~100%RH
- Operating altitude 0 – 4,000 m (decrease in electrical capacity from 3,000 m)
- Ventilation Natural convection
- Display LED Indicators; Integrated WLAN + FusionSolar application
- RS485 communication; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G/3G/2G via Smart Dongle-4G
- (Optional)
- Weight (including mounting bracket) 17 kg
- Dimensions (including mounting bracket) 525 x 470 x 166 mm
- Degree of protection IP65
- Power consumption at night < 5.5 W
COMPLIANCE WITH STANDARDS (MORE OPTIONS AVAILABLE UPON REQUEST)
- Safety EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116
- Electrical network connection standards G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS
- 097-2-1, IEC61727, IEC62116, DEWA 2.0
Huawei Solar FusionSolar APP
We inform you that the Huawei Solar's FusionSolar APP is not available on Google Play (Android).
From now on, to be able to monitor and configure Huawei settings through the FusionSolar APP you must download the application from Huawei's AppGallery.
AppGallery (Android) It is the platform to acquire Huawei mobile applications. Through the link you have to download the APK file of the application for installation.
we leave download option:
Link: Click here to download