Description
This HUAWEI Self-Consumption Kit gives us approximately 30Kw/hour of energy savings, making a calculation per day in winter about 4 hours gives us 120KW/day of savings and in summer about 7 hours 210KW/day of savings.
Three-phase system type: 400V AC
Photovoltaic Solar Power: 29700W
Maximum output power to home: 30 KW
AVERAGE daily annual production: 118.8 KWH day
Installation guide HuaWei inverter to HUAWEI 30KTL – 40KTL M3 inverters
This Solar Kit is compatible with the following structures:
Perforating Roof Structures They are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the screws and accessories are made of stainless steel.
Sheet Sandwich Roof Structures with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Structures Flat or little inclination Designed to be able to anchor the solar panels to the ground, whether on a flat roof on top of a building or on the ground, we have several angles of inclination to be able to adapt all the structures to the needs that arise in each case.
Characteristics of the SUN2000L-30KTL Self-Consumption Inverter
The SUN2000L-30KTL Self-consumption inverter has 4 MPPT trackers, which means that we can have 4 different orientations for our photovoltaic field without affecting the production of one over the other. The SUN2000L-30KTL Self-consumption inverter has an extremely low range for starting its internal regulator. The working range of its regulator is between 140 and 980V, so with 5 panels of 72 cells it can be started. It has a high limit on its working voltage, so we can use any type of panel as long as we respect the ranges set by the manufacturer.
This inverter has an integrated signal repeater that allows communication between inverters thanks to the fact that the Wi-Fi signal is transferred from one SUN2000L-30KTL Self-consumption inverter to another. This is very interesting for large photovoltaic installations that require several inverters and that would otherwise limit communication between them.
This inverter is compatible with the Chint Three-phase wattmeter. To confirm compatibility with other wattmeters, contact us or consult the technical sheet in each case.
The AutoconsumoSUN2000L-30KTL 30KW inverter offers great operating efficiency of more than 98% and has the best expansion capabilities at the best price. Even though it is a grid-connected inverter.
Component Description:
- Detailed information about investors HERE
Contact us to receive more information.
Technical Data Sheet 30kw Huawei Inverter
- Efficiency
- Maximum efficiency 98.6%
- Weighted European efficiency 98.4%
-
- Standards compliance (more options available upon request)
- Safety EN 62109-1/-2, IEC 62109-1/-2, IEC 62116
- Electrical network connection standards IEC 61727, VDE-AR-N-4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661 , RD 1699, PO 12.3, RD 413, C10/11, EN 50438-Turkey, ABNT
- General data
- Dimensions (W x H x D) 930 x 550 x 283 mm
- Weight (including mounting bracket) 62 kg
- Operating temperature range -25°C ~ 60°C
- Cooling Natural convection
- Max. Operating altitude 4,000 m
- Relative operating humidity 0 ~ 100%
- Amphenol Helios H4 DC Connector
- AC Connector Waterproof PG Terminal + OT Connector
- Degree of protection IP65
- Transformerless Topology
- Nighttime power consumption <2.5W
- Communication
- Display LED Indicators, Bluetooth + APP
- RS485 Yes
- USB Yes
- BUS monitoring (MBUS) Yes (isolation transformer required)
- Protecciones
- Input side disconnect device Yes
- Anti-island protection Yes
- AC overcurrent protection Yes
- DC reverse polarity protection Yes
- String level monitoring Yes
- Type II DC Surge Arrester
- Type II AC Surge Arrester
- DC insulation resistance detection Yes
- Residual current monitoring Yes
- Active power 30,000 W
- Max. AC Appearance Power 33,000 VA
- Max. AC active power 30,000 W
- Rated output voltage 230 V / 400 V, 3W + N + PE;
- Nominal AC mains frequency 50 Hz / 60 Hz
- Rated output current 43.3 A
- Max. output current 48 A
- Adjustable power factor 0,8 capacitive … 0,8 inductive
- Maximum total harmonic distortion<3%
- Departure fromHome
- Maximum input voltage 1 1,100 V
- Maximum input current per MPPT 22 A
- Maximum short circuit current 30 A
- Starting voltage 250 V
- MPPT 2 operating voltage 200 V ~ 1,000 V
- Rated input voltage 620 V
- Number of MPPTs 4
- Maximum number of entries 8
Huawei Solar FusionSolar APP
We inform you that the Huawei Solar's FusionSolar APP is not available on Google Play (Android).
From now on, to be able to monitor and configure Huawei settings through the FusionSolar APP you must download the application from Huawei's AppGallery.
AppGallery (Android) It is the platform to acquire Huawei mobile applications. Through the link you have to download the APK file of the application for installation.
we leave download option:
Link: Click here to download