HuaWei 40kwh Solar Kit Self-consumption Grid Injection Three-phase

Description

This HUAWEI Self-Consumption Kit gives us approximately 40Kw/hour of energy savings, making a calculation per day in winter about 4 hours gives us 160KW/day of savings and in summer about 7 hours 280KW/day of savings.

Three-phase system type: 400V AC

Photovoltaic Solar Power: 39600W

Maximum output power to home: 40 KW

AVERAGE daily annual production: 158.4 KWH day

English Technical Sheet

English Manual

Spanish Technical Sheet

Spanish Manual

Installation guide HuaWei inverter to HUAWEI 30KTL – 40KTL M3 inverters

This Solar Kit is compatible with the following structures:

Perforating Roof Structures They are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the screws and accessories are made of stainless steel.

Sheet Sandwich Roof Structures  with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.

Structures Flat or little inclination Designed to be able to anchor the solar panels to the ground, whether on a flat roof on top of a building or on the ground, we have several angles of inclination to be able to adapt all the structures to the needs that arise in each case.

Characteristics of the SUN2000L-40KTL Self-Consumption Inverter

The SUN2000L-40KTL Self-consumption inverter has 4 MPPT trackers, which means that we can have 4 different orientations for our photovoltaic field without affecting the production of one over the other. The SUN2000L-40KTL Self-consumption inverter has an extremely low range for starting its internal regulator. The working range of its regulator is between 140 and 980V, so with 5 panels of 72 cells it can be started. It has a high limit on its working voltage, so we can use any type of panel as long as we respect the ranges set by the manufacturer.

This inverter has an integrated signal repeater that allows communication between inverters thanks to the fact that the Wi-Fi signal is transferred from one SUN2000L-40KTL Self-consumption inverter to another. This is very interesting for large photovoltaic installations that require several inverters and that would otherwise limit communication between them.

This inverter is compatible with the Chint Three-phase wattmeter. To confirm compatibility with other wattmeters, contact us or consult the technical sheet in each case.

The AutoconsumoSUN2000L-40KTL 40KW inverter offers great operating efficiency of more than 98% and has the best expansion capabilities at the best price. Even though it is a grid-connected inverter.

Component Description:

• Detailed information about investors HERE

Contact us to receive more information.

Huawei 40kw Technical Data Sheet

Efficiency

• Maximum efficiency 98.8% @480 V; 98.6% @380V / 400V
• Weighted European efficiency 98.6% @480 V; 98.4% @380V / 400V

Home

• Maximum input voltage 1,100 V
• Maximum input current per MPPT 22 A
• Maximum short circuit current 30 A
• Starting voltage 250 V
• Operating voltageMPPT 200 V ~ 1,000 V
• Nominal input voltage 620 V @380 Vac/ 400 Vac; 720V @480Vac
• Number of MPPTs 4
• Maximum number of entries per MPPT 8

Departure from

• Active power 40,000 W
• Max. AC Appearance Power 44,000 VA 3
• Max. AC active power (cosφ = 1) Default 44,000 W; 36,000 W optional configuration
• Rated output voltage 220 V / 380 V, 230 V / 400 V, default 3W + N + PE; 3W + PE optional in 277 V / 480 V, 3W + PE configuration
• Nominal AC mains frequency 50 Hz / 60 Hz
• Nominal output current 54.6 A @380 V, 52.2 A @400 V, 43.4 A @480 V
• Max. Output current 60.8 A @380 V,57.8 A @400 V,48.2 A @480 V
• Adjustable power factor 0,8 capacitive … 0,8 inductive
• Maximum total harmonic distortion＜3%

Protecciones

• Input side disconnect device Yes
• Anti-island protection Yes
• AC overcurrent protection Yes
• DC reverse polarity protection Yes
• String level monitoring Yes
• Type II DC Surge Arrester
• Type II AC Surge Arrester
• DC insulation resistance detection Yes
• Residual current monitoring Yes

Communication

• Display IndicatorsLED, Bluetooth + APP
• RS485 Yes
• USB Yes
• BUS Monitoring (MBUS) Yes (isolation transformer required)

General data

• Dimensions (W x H x D) 930x 550x 283 mm
• Weight (including mounting bracket) 62 kg
• Operating temperature range -25°C ~ 60°C
• Cooling Natural convection
• Max. Operating altitude 4,000 m
• Relative operating humidity 0 ~ 100%
• Amphenol Helios H4 DC Connector
• AC Connector Waterproof PG Terminal + OT Connector
• Degree of protection IP65
• Transformerless Topology
• Nighttime power consumption <2.5W
• Standards compliance (more options available upon request)

Security

• EN 62109-1/-2, IEC 62109-1/-2, EN 50530, IEC 62116, IEC 60068, IEC 61683
• Electrical grid connection standards
• IEC 61727, VDE-AR-N4105, VDE 0126-1-1, BDEW, G59/3, UTE C 15-712-1, CEI 0-16, CEI 0-21, RD 661, RD 1699,
• PO 12.3,RD 413, EN-50438-Turkey, EN-50438-Ireland, C10/11, MEA, Resolution No.7, NRS 097-2-1, AS/NZS 4777.2

Huawei Solar FusionSolar APP

We inform you that the Huawei Solar's FusionSolar APP is not available on Google Play (Android).

From now on, to be able to monitor and configure Huawei settings through the FusionSolar APP you must download the application from Huawei's AppGallery.

AppGallery (Android) It is the platform to acquire Huawei mobile applications. Through the link you have to download the APK file of the application for installation.

we leave download option:

Link:             Click here to download