HuaWei 5000wh self-consumption solar kit Grid injection

Description

Active arc flash protection powered by AI
Compatible with SUN2000-450W-P optimizer
Battery ready by direct plug & play, no additional device or any modification required
Models from 2KW to 10KW, both single-phase and three-phase, have a 5KW LUNA battery charging function.
High efficiency inverter topology, max. Efficiency 98,4%

This HUAWEI Self-Consumption Kit gives us approximately 5000w/hour of energy savings, making a calculation per day in winter about 4 hours gives us 20000w/day of savings and in summer about 7 hours 35000w/day of savings.

Presentations with VIDEO HERE

Single-phase system type: 230V AC

Photovoltaic Solar Power: 5400W

Maximum output power to home: 5000W

AVERAGE daily annual production: 21.6 KWH day

Huawei 2KTL-6KTL Manual:
English

Spanish

Technical Data Sheet 2KTL-6KTL:
Spanish

Installation Guide HuaWei Inverter for Luna 2000 Batteries

Installation guide HuaWei inverter to HUAWEI 2KTL – 6KTL L1 inverters

This Solar Kit is compatible with the following structures:

Perforating Roof Structures They are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the screws and accessories are made of stainless steel.

Sheet Sandwich Roof Structures  with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.

Structures Flat or little inclination Designed to be able to anchor the solar panels to the ground, whether on a flat roof on top of a building or on the ground, we have several angles of inclination to be able to adapt all the structures to the needs that arise in each case.

Characteristics of the SUN2000L-5KTL Self-Consumption Inverter

The SUN2000L-5KTL Self-consumption inverter has 2 MPPT trackers, which means that we can have 2 different orientations for our photovoltaic field without affecting the production of one over the other. The SUN2000L-5KTL Self-consumption inverter has an extremely low range for starting its internal regulator. The working range of its regulator is between 120 and 480V, so with 4 panels of 72 cells it can be started. It has a high limit on its working voltage, so we can use any type of panel as long as we respect the ranges set by the manufacturer.

This inverter has an integrated signal repeater that allows communication between inverters thanks to the fact that the Wi-Fi signal is transferred from one SUN2000L-5KTL Self-consumption inverter to another. This is very interesting for large photovoltaic installations that require several inverters and that would otherwise limit communication between them.

This inverter is compatible with the single-phase Chint wattmeter. To confirm compatibility with other wattmeters, contact us or consult the technical sheet in each case.

The AutoconsumoSUN2000L-5KTL 5000W inverter offers great operating efficiency of more than 98% and has the best expansion capabilities at the best price. Even though it is a grid-connected inverter.

Component Description:

• Detailed information about investors HERE

Contact us to receive more information.

Technical Data Sheet 5kw Huawei Inverter

EFFICIENCY:

• • Maximum efficiency: 98,6%
  • Weighted European efficiency: 98%

TICKETS

• • Maximum photovoltaic power: 7500WP
  • Maximum input voltage: 600v/495V
  • Operating voltage range: 90V ~ 600V / 90V ~ 495V
  • Starting voltage: 120V
  • Maximum Power MPPT Voltage Range: 260V – 480V
  • Rated input voltage: 380V
  • Maximum input current per MPPT: 11 A
  • Maximum short circuit current: 15 A
  • Number of MPP trackers: 2

PROJECTION

• • Connection to electrical network: Single-phase
  • Rated output power: 5000W
  • Maximum apparent power: 5500 VA
  • Rated output voltage: 220V/230V/240V
  • Rated AC mains frequency: 50Hz/60Hz
  • Maximum output current: 25A
  • Adjustable power factor: 0,8 capacitive… 0,8 inductive
  • Maximum total harmonic distortion: ≤ 3%

PROTECTION

• • Protection against electrical islands: Yes
  • DC reverse polarity protection: Yes
  • Insulation monitoring: Yes
  • DC Lightning Protection: Yes
  • AC Lightning Protection: Yes
  • Residual current monitoring: Yes
  • AC overcurrent protection: Yes
  • AC short circuit protection: Yes
  • AC surge protection: Yes
  • Overheat Protection: Yes

GENERAL INFORMATION

• • Operating temperature range: -30 ~ +60°C (Electrical capacity derating above 45°C at rated output power)
  • Relative operating humidity: 0%RH～100%RH
  • Operating altitude: 0 – 4000 m (decrease in electrical capacity from 2000 m)
  • Cooling: Natural convection
  • Display: LED indicators
  • Communication: RS485, WLAN
  • Weight (including mounting bracket): 10,6 kg (23,4 lb)
  • Dimensions (including mounting bracket): 375 x 375 x 161,5 mm (14,8 x 14,8 x 6,4 inches)
  • Degree of protection: IP65

BATTERY COMPATIBILITY

• • Battery: LG Chem RESU 7H_R / 10H_R
  • Voltage range: 350 ~ 450 VDC
  • Maximum current: 10A
  • Communication: RS485

COMPLIANCE WITH STANDARDS

• Safety: EN/IEC 62109-1, EN/IEC 62109-2
• Maximum number of entries per MPPT: 1

Huawei Solar FusionSolar APP

We inform you that the Huawei Solar's FusionSolar APP is not available on Google Play (Android).

From now on, to be able to monitor and configure Huawei settings through the FusionSolar APP you must download the application from Huawei's AppGallery.

AppGallery (Android) It is the platform to acquire Huawei mobile applications. Through the link you have to download the APK file of the application for installation.

we leave download option:

Link:             Click here to download