The 1800w (2.3CV) solar pumping kit has been designed for irrigation or pumping of wells for heights of up to 190 meters and a water flow that will vary from 1000 to 6500 liters per hour depending on the height at which the Water. This pump will have a full 8 hours global operation in summer and 6 hours during the winter season.
The solar water pump works directly with solar panels during the day, when its amperage is sufficient for the pump to start. Being its operation at one hundred percent performance during the midday hours, which is when water will most be needed for livestock or for irrigation of agricultural fields. The pump is a permanent magnet pump which requires no maintenance. Thanks to brushless motors The service life of the brushless motor is longer: since it has no brushes, there is no friction that generates wear or noise, and it does not require continuous maintenance.
Submersible pumping kit installation
In Wccsolar the installation of this Submersible pumping kit is recommended to be installed by a photovoltaic professional , or strictly follow the installation instructions to avoid bad connections and breakdowns due to incorrect installation.
This Solar Kit is compatible with the following structures:
Perforating Roof Structures are designed to be installed in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the hardware and accessories are stainless steel.
Sheet sandwich roof structures with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the cover or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Flat or low tilt structures designed to be able to anchor the solar panels to the ground, either on a flat roof above a building or on the ground, we have various tilt angles to be able to adapt all the structures to the needs that arise in each case.
Buy Submersible pumping kit
Buying the Submersible pumping kit is fast, safe and comfortable thanks to Wccsolar, in addition the Submersible pumping kit has an official Wccsolar guarantee.
Contact us for more information.
Informative Video of operation HERE
Pumping Kit 1800w / 2.3hp Flow max. 6500 Liters / hour Height 190 meter
This Kit includes
- 9 x 330w Poly Solar Panel Configuration of 9 panels 3 Parallel 3 series
- 1 x Solar Water Pump 1800w 4SSC 6.5 / 1800/110
- 1 x Pump Regulator
- 4 x MC4 connectors
- 1 x MC4 3in1 multi-connectors
- 1 x Magnetothermic
- 40 x 6mm2 cable meters
- Well probes
- Tank probes
4SSC 6.5 / 1800/110 pump characteristics
- Height: max. 190meters.
- Flow: max. 6.5 m3 / h (6500 liters / hour).
- Input voltage: 110V
- Efficiency: 98%.
- Protection mode: IP54
- Minimum diameter of the well: 14 cm.
- Pump diameter: 95mm
- Motor rated power: 1800W.
- Protection mode. IP68.
- Pump Outlet - 1.25 Inch Section
- Weight: 22KG
- Way of connecting 3 Parallels of 3 series Total 9 panels (300w 310w 320w 330w) 72 Cells
- 3 year warranty
- Total Pump Height 76cm
- Pump Diameter 10cm