Introducing the PlusEnergy REVO-E II 3000w 24v mppt 90 hybrid inverter with solar panel input up to 500 volts . The new hybrid inverter model allows operation with and without batteries. Only by connecting the solar panels to the hybrid inverter will we already have a 230v output to be able to carry out self-consumption installations, power pumps or function as a pure wave inverter in isolated installations. The power factor is 1, so the equipment delivers 3000w reais and is parallel to up to 9 devices.

Inverter charger 3000W 24V, with MPPT 90A special for photovoltaic solar kits , is a pure sine wave inverter has a 60A battery charger and 90A MPPT solar controller With a 500V DC input integrated into a single device. It is one of the best solutions in the market today, since it is capable of managing the charge of solar panels , the charge of batteries , and also has a battery charger, which allows charging from a generator set to gasoline or with the power grid in case the solar panels were not able to supply the necessary energy. The function of the Solar hybrid inverters is not to pass the current through the batteries throughout the day, but rather to use the energy they provide. The battery is charged during the day with the surplus of production that we do not use, which is the figure of power that we see on the screen.


Grace Parallel Function Inverters Chargers allow the most demanding installations to have a maximum of 9 inverters connected in parallel increase up to 27KW continuous and 54KW clamp peak (valid for 220v single phase and 380v three phase)


These are pure wave inverters and some of the models are also parallel, supporting higher powers than other inverters.

The battery is charged during the day with the surplus of production that we do not use, which is the figure of power that we see on the screen.


The inverter is capable of generating a pure sine wave, with the same characteristics as that created by the conventional electricity grid.


All this can be visualized through the LCD display. which is included in the Must Solar Inverter housing. In addition, the equipment of the manufacturer Must Solar allows the programming of the operating parameters of the installation, as well as the connection via Wifi to be able to monitor it from any computer through a web page.


Operation scheme:
In the case of being at night, a cloudy day or having a demand for energy higher than what the panels can provide, the necessary energy is provided by the battery bank. If for example at 12: 00 noon we are producing with 1,500W solar panels, and the house currently consumes 500W, we will be charging the batteries with the 1,000W left over, so that we can have supply during the night.


Installation 3KW REVO-24V hybrid inverter

To provide maximum protection for both the inverter and the system in general, we advise you to put a Protection and Pre-Installation Kit . The installation of this 3KW 24v hybrid inverter model is simple with your pre-installation kit, however in Wccsolar we recommend that the 3KW 24v hybrid inverter be installed by a photovoltaic professional , or the installation instructions are strictly followed to avoid bad connections and breakdowns due to improper installation.


Buy 3KW REVO-E 500V hybrid inverter


Buying the 3KW 24v hybrid inverter is fast, safe and convenient thanks to Wccsolar, plus the 3KW 24v hybrid inverter It has an official Wccsolar guarantee.


Contact us to receive more information.


2 years warranty


Parameter Configuration Video


REVO-E Manual


Solar inverter 3KW 24v hybrid Regulator MPPT 90A 500Vdc Charger 60A

€625.00 Regular Price
€549.00Sale Price
  • Data sheet

    - Model: 3KW REVO-E 500V

    - Nominal power: 3000W.
    - Input voltage: 24V.
    - Selectable voltage range: 170-280 VAC (for computers) 90-280 VAC (for household appliances).
    - Frequency range: 50Hz / 60Hz (automatic detection).
    - Output voltage regulation (battery mode): 230 VAC + -5%
    - Maximum power (starting peaks): 6000W.
    - Efficiency: 93.5%.
    - Transfer time: 10 ms (for computers) 20 ms (for appliances).
    - Wave type: Pure sine wave.

    - Maximum open circuit voltage 500VDC photovoltaic panel
    - Battery voltage: 24V.
    - Float charge voltage: 27V.
    - Overload protection: 30V.

    - PV Nominal power: 2500W.
    - Regulator charge current: 90A MPPT.
    - Charger charging current: 60A.
    - Stand-by power consumption: 2W.

    - Measures: 141 x 295 x 528mm
    - Weight: 13.5 Kg.



  • characteristics

    Inverter Hybrid 3kw 24v MPPT concentrates three powerful devices in a single unit. In this way, the operation of the entire solar system can be regulated and controlled from a single screen.

    This 24V MPPT 3Kw model includes:


    - A 3000W 24V pure sine wave inverter:

    Pure wave inverter of 3000W nominal power with maximum power for several seconds of 6000W, to cover high starting peaks of some motorized devices. This inverter can be used for all types of electrical devices as long as the rated power of 3000W is not exceeded. It is recommended for the operation of a refrigerator, freezer, television, washing machine, coffee maker, grill, microwave, dishwasher, lighting, small appliances such as blender, juicer, coffee maker, fan, computer, printer, audio or DVD player, drill, etc.

    The Omega screen allows you to visualize the real power of the devices that are connected to the solar system. This screen also indicates the percentage of use of the inverter according to the requirement to be made work at any time.


    - A 90A MPPT maximizer regulator:

    Each unit includes a large MPPT charge controller that allows up to 80 amps in 24V panel capacity. Either insulated panels: power between 150 to 330W, or network (MPPT): power panels equal to or greater than 250W. The regulator is the default display of the 5kw 48v MPPT Hybrid Inverter and allows you to control the battery charge level at all times.

    The regulator can be configured according to the type of battery installed: acid (solar monoblock or stationary) or agm / gel. In this way the charge is accurate and the battery life is extended. It also allows you to configure the three stages of loading: raw loading, absorption and flotation.


    - A 60A battery charger:

    The battery charger allows the solar installation to be powered by external support energy through the use of a generator or generator set. This charger can be configured to allow power to pass once the batteries go down to a marked discharge level. In this way, with the use of an automatic generator (or network power), it will automatically start up becoming a totally autonomous solar installation.

    This advanced charger uses multiple stages to quickly recharge the batteries. Thanks to these recharges, the battery never drops below a certain level of charge, which prolongs its life cycle.

    The use of a charger is ideal to cover high consumption peaks in facilities where there are specific days with much higher consumption than usual. In this way the consumption is covered and avoids having to oversize the solar installation for this reason.



    Other outstanding features:

    - This MPPT 3.0 KW model allows several units to be connected in parallel using a connection cable, which multiplies the power of the inverter.

    - It offers configuration of priority of load according to its origin (solar / electric company or generator), as well as priority of the origin of the output power (solar / electric company / solar-battery-electric company).

    - The charger has a wide voltage range as well as a filter to regulate the wave oscillations of older generators. Thus, it can be used to connect all types of generator sets as well as the electricity grid itself.-Automatic restart while the AC is recovering.

    - Protection against overload and short circuit.

    - Intelligent battery charger design to optimize battery performance.

    - Cold start function.

In WccSolar we are Multibrand Distributors of Solar Energy Supplies.


WccSolar is First Distributor of several brands of Solar Inverters, We also have an associated technical service to respond quickly to any problem or incident that could be caused by your Inverter devices.


This technical service will be active both during the warranty period and outside this period. In which this service will be offered to the client so that any problem can be solved. Offering peace of mind to the customer in the purchase of our devices.

Shipments to Spain in 24h
In Europe

3-6 day

Solar Kits WccSolar of Aislada or Network in promotion.


Save with Photovoltaic Energy Self-Consumption at the best prices, we will take you home and we will install it at very cheap prices.


Customer Service and Telephone Sales

854 556 349


Technical service

854 803 624


Send us your questions


For Frequently Asked Questions Check our Blog

All our products for Renewable Energies comply with the most demanding regulations.


Your order will always carry the step-by-step instructions for easy assembly.

Telephone Attention:

0034 854 556 349

Technical service:

0034 854 803 624


0034 665 107 379


Calle Imprenta, 18, nave 44

41016 - Sevilla. Spain

Discover the New Promotions and Offers in Solar Energy with your Renewable Supply Store

2012 © WccSolar - All rights reserved