The 400w solar pumping kit (2 / 4cv) has been designed for irrigation or pumping of wells for heights of up to 80 meters and a water flow that will vary from 50 to 1600 liters per hour depending on the height that needs to be reached. Water. This pump will have a full global operation of 8 hours in summer and 6 hours during winter season.
The solar water pump works directly with solar panels during the day, when their amperage is sufficient for the pump to start. Being its operation at one hundred percent performance during the noon hours, which is when water will be needed most for livestock or for irrigation of agricultural fields. The pump is a permanent magnet so it does not need maintenance. Thanks to Brushless Motors The useful life of the brushless motor is longer: as it does not have brushes, there is no friction that generates wear or noise, and continuous maintenance is not necessary.
Submersible pumping kit installation
In Wccsolar, the installation of this Submersible pumping kit is recommended that it be installed by a photovoltaic professional , or the installation instructions are strictly followed to avoid bad connections and breakdowns due to incorrect installation.
This Solar Kit is compatible with the following structures:
Perforating Roof Structures are designed to install in a horizontal position, with the same inclination as the existing roof. Vertical installation is also possible, forming a vertical column. Designed to withstand loads such as snow and wind, made entirely of high quality aluminum, while the hardware and accessories are made of stainless steel.
Sheet metal sandwich roof structures with special anchors for sheet metal roofs. This structure is made of aluminum and maintains the same inclination of the deck or roof where it is installed. It is a universal structure that adapts to any brand of plate. Its installation is simple and does not require technical knowledge.
Structures Flat or low inclination designed to be able to anchor the solar panels to the ground, either on a flat roof on top of a building or on the ground, we have various inclination angles to be able to adapt all the structures to the needs that arise in each case.
Buy Submersible pump kit
Buying the Submersible pumping kit is fast, safe and convenient thanks to Wccsolar, in addition the Submersible pumping kit has an official guarantee from Wccsolar.
Contact us to receive more information.
Informative video of operation HERE
Solar kit Pumping 400w - 2 / 4cv Flow max. 1600 Liters / hour Height 80 meters
This Kit includes
- 2 x 330w Poly Solar Panel Configuration of 2 panels of 2 Parallel
- 1 x Solar Water Pump 400w 3SSH 1.6 / 400/36
- 1 x Pump Regulator
- 2 x MC4 connectors
- 1 x MC4 2N1 connectors
- 1 x Magnetothermic
- 20 x 6mm2 cable meters
- Well probes
- Tank probes
- Height: max. 80 meters.
- Flow: max. 1.6 m3 / h (1600 liters / hour).
- Input voltage: 36V
- Efficiency: 98%.
- Protection mode: IP54
- Minimum diameter of the well: 10 cm.
- Nominal motor power: 400W.
- Protection mode. IP68.
- Pump outlet intake: 0.75 inch section
- Weight: 10KG
- Way to connect 2 Parallel Panels (300w, 310w, 320w, 330w.)
- 2 year warranty