115,00€ (VAT included)
Out of Stock
El Solar regulator 12v/24v 20A MPPT 100v It is focused on those people who have 1 or 2 grid panels in their isolated solar installation. This special regulator includes an LCD screen and allows you to adjust the voltage of the panels network at the same voltage as the isolated panels. Ensuring that the batteries work well and have a long useful life. The use of network panels with normal regulators (PWM) causes irreparable damage to the batteries, so it is always recommended in these cases to use MPPT regulators.
Installation Solar regulator 12v / 24v 20A MPPT 100v
The installation of this regulator model is very simple, however at Wccsolar we recommend that the Solar regulator 12v/24v 20A MPPT 100v be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid breakages and breakdowns due to incorrect installation.
Buy Solar regulator 12v / 24v 20A MPPT 100v
Buy Solar regulator 12v / 24v 20A MPPT 100v It is fast, safe and comfortable thanks to Wccsolar, plus the Solar regulator 12v/24v 20A MPPT 100v It has an official Wccsolar guarantee.
Contact us to receive more information.
Exclusive
– MPPT technology.
– Maximum conversion efficiency of 97%.
– High efficiency of maximum tracking point: 99%.
– Charging in 4 stages with PWM output.
– Cooling by natural convection.
– Output power in ambient temperatures of up to 45ºC.
– Temperature compensation.
– Battery charging option according to AGM, Gel or Acid type.
– With RS485 output port.
– Automatic day and night recognition.
– Diversified load control.
– Information and control display screen with wiring.
- 2 years warranty.
- CE certificate.
– Electronic protections for short circuit, overload, overdischarge, reverse polarity in panels and reverse polarity in batteries.
– Nominal system voltage: 12 or 24V.
– Rated load current: 20A.
– Maximum battery voltage: 32V.
– Maximum open circuit voltage: 100V.
– Maximum input power in panels: 260W (at 12V) 520W (at 24V).
– Self-consumption: <10 mA (24V).
– Measurements: 220 x 154 x 52 mm.
- Weight: 1,10 Kg.
The Differences of PWM and MPPT Regulators
What solar regulator do I need depending on the type of solar panel?
Normal regulator (PWM): Whether you have 12V solar panels to use in an isolated (or autonomous) 12V solar installation, or if you have 24V solar panels and 72 cells to use in a 24V installation, you must use a normal regulator (type PWM). Which is the most economical and suitable for this type of solar panel.
Maximizing regulator (MPPT): If you have 24V solar panels and 60 cells (plates with a power greater than 200W), to use in a 24V isolated solar installation, you must use an MPPT maximizing regulator. Necessary to amplify the voltage of these solar panels, so that when it reaches the batteries it is high and the energy is stored well. The MPPT regulator is more expensive but is necessary with this type of plates. Which without the use of MPPT, the useful life of the batteries would be damaged since they could not be equalized and would sulfate in a few months.
