80A MPPT solar regulator 145v 12v/24v/48v PC18-8025F LCD

Description

The 80A MPPT PC18-8025F solar regulator can be used in 12v solar installations, 24v solar installations o 48v solar installations has been manufactured to use photovoltaic panels network in isolated solar installations. That is, it regulates the low voltage of the solar panels to be used in a conventional solar installation. The function of the maximiser is to determine the maximum power point of the panel, to improve its performance and the production of electrical energy. This regulator has a capacity of 80 amps and allows a maximum open circuit voltage of the panel of 245V. In order to control the battery charge and extend its useful life, this regulator charges in four stages: normal, absorption, float and equalisation. Thanks to this, the battery cells are also cleaned and its operation is improved.

Installation Solar regulator 80A MPPT 145v 12v / 24v / 48v PC18-8025F

The installation of this regulator model is very simple, however at Wccsolar we recommend that the 80A MPPT solar controller 145v 12v/24v/48v PC18-8025F be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid breakages and breakdowns due to incorrect installation.

Buy Solar regulator 80A MPPT 145v 12v / 24v / 48v PC18-8025F

Buy Solar regulator 80A MPPT 145v 12v / 24v / 48v PC18-8025F It is fast, safe and comfortable thanks to Wccsolar, plus the 80A MPPT solar regulator 145v 12v/24v/48v PC18-8025F It has an official Wccsolar guarantee.

to receive more information.

PC18-8025F Manual English

Data sheet

PV Open Circuit Voltage: 145VDC

PV field and MPPT voltage range:

12V= 16 VDC ~ 100 VDC

24V= 32 VDC ~ 230VDC

48= 64 VDC ~ 230VDC

Max PV Input Power (12V): 1250w

Max PV Input Power (24V): 2500W

Max PV Input Power (36V): 3750W

Max PV Input Power (48V): 5000W

-BATTERY-

Absorption Voltage: 15.5V / 30.0V / 45.0V / 60.0V

Refloat Voltage: 14.5V / 29.5V / 44.5V / 59.0V

Float Voltage: 10.0V / 17.0V / 25.5V / 34.0V

Low Voltage Protection Point: 0VDC / 20VDC / 30VDC / 40VDC

Temperature Coefficient Compensation: -5mv/℃/cell (25℃ vef)

Size(mm):284*165*97mm

Weight: 4Kg

Details of the product

• Data logging: Last 128 days – Ah, Wh, peak W, Amps, PV voltage, float time, max and min battery voltage, absorption for each day as well as accumulated Ah and kWh values
• Wind/hydraulic energy: Consult manufacturer for compatible systems
• Positive ground systems: Requires bipolar switch to disconnect positive and negative conductors in PV array and battery.
  (HUB4 and HUB10 are not recommended for use in positive ground systems)
• Operating temperature range: -40ºC to +60ºC (Output power is derated from 40ºC)
• Environmental category: For indoor installation

The Differences of PWM and MPPT Regulators

What solar regulator do I need depending on the type of solar panel?

Normal regulator (PWM): Whether you have 12V solar panels to use in an isolated (or autonomous) 12V solar installation, or if you have 24V solar panels and 72 cells to use in a 24V installation, you must use a normal regulator (type PWM). Which is the most economical and suitable for this type of solar panel.

Maximizing regulator (MPPT): If you have 24V solar panels and 60 cells (plates with a power greater than 200W), to use in a 24V isolated solar installation, you must use an MPPT maximizing regulator. Necessary to amplify the voltage of these solar panels, so that when it reaches the batteries it is high and the energy is stored well. The MPPT regulator is more expensive but is necessary with this type of plates. Which without the use of MPPT, the useful life of the batteries would be damaged since they could not be equalized and would sulfate in a few months.