Install your device safely structure for solar panels and aluminum supports for their installation. These universal photovoltaic solar structures are adaptable to any brand and type of panel within the different measurement ranges offered.
Showing 1-32 of 52 results
The type of structure or support for solar panels used with different types of solar panels is an essential element for the maximum use of solar radiation. That is why in PlusEnergy We offer you all kinds of solar panel structures that ensure the proper inclination depending on your base. PlusEnergy structures are manufactured to withstand the temperature changes, strong gusts of wind and present a unbeatable durability with a guarantee for years.
The good performance of a solar installation is strongly determined by the orientation of the solar panels, and this is taken care of by solar panel structures and solar panel supports. The solar panel structures offered by PlusEnergy cover all the needs that any installation may have. There is a wide range of solar panel systems, wide range of structures and supports for solar panels according to the number we need to place, the orientation we want to give and the location.
The structures for solar or solar panel supports will determine the orientation of the solar panel relative to the ground depending on how the solar panel structure is installed. The orientation is what determines the maximum use of the material. Generally, orientations of 30 or 60º are acquired.
The structures and supports for solar panels offered by PlusEnergy are made of hot-dip galvanized steel, and the screws and other parts are made of stainless steel and galvanized, so that all structures and supports for solar panels withstand extreme weather conditions.
The structure for installing solar panels is a important element within solar installations, since it performs a double function: the correct support of the solar panels and the possibility of changing the orientation and/or inclination of the panels in order to obtain greater performance from the solar installation.
Along with the orientation and inclination, the type of surface where the panels will be installed thanks to the supports for solar panels, is one of the most important parameters when choosing the structure.
In order to take advantage of the maximum performance of a solar panel in Spain, it will have to be oriented as far as possible towards the south, to optimize its performance.
There are different types of structures for photovoltaic modules depending on the surface where they are going to be installed:
All these structures are made of aluminum and the screws are made of stainless steel.
There are different names for solar panel structures depending on the place where they are going to be located:
All solar panel structures and supports offered here come with a warranty.
For more information about the installation of solar panels Contact us, we will be happy to explain how to optimize solar energy for homes according to your needs.
An incorrect inclination is one that does not optimize the structural efficiency of photovoltaic solar panels during the peak sun hours of the photovoltaic installation because the panels are located in such a way that the maximum possible photovoltaic energy is not obtained.
The inclination of the solar panels is an element that is often not taken into account but is essential to guarantee the efficiency of the installation.
Although the structures for solar panels on roofs have an inclination, in each case the appropriate inclination must be calculated to optimize the efficiency of the panels.
Another doubt about fixing structures for solar panels is the separation that must be left between the rows of solar panels.
For the length of the solar panel we will express it in meters, the point will be used to differentiate the decimals. Depending on how we place the panel, we will have to take into account its width or length to be able to calculate the projected shadow.
In the case that the plate is placed vertically, the meters expressed refer to the length of the panel. In the case that the plate is placed horizontally, the meters expressed refer to the width of the solar panel. Remember that the angle of the solar panel on the horizontal is and PlusEnergy remains at your disposal to advise you on the Solar Panel Structure or any of the products on our website, Contact us .
