40A Wellsee solar regulator 12v / 24v

Description

Wellsee 12v/24v 40A solar regulator is a low-cost pulse width modulated charge controller; It incorporates an internal temperature sensor. In addition, the Wellsee 12v / 24v 40A Solar Regulator is capable of charging the batteries in three stages, initial stage, absorption stage and a final flotation stage. 

This Solar regulator has automatic identification of the voltage level of the system. batteries and automatic identification of entry solar, intelligent charging mode and charge and discharge protection. Furthermore, the Solar regulator 12v / 24v 40A Wellsee charges specifically based on our battery technology, as well as battery reverse discharge protection. Another of the most attractive features of Solar regulator 12v / 24v 40A Wellsee, It has overvoltage protection.

Installation Solar regulator 12v / 24v 40A Wellsee

The installation of this regulator model is very simple, however at Wccsolar we recommend that the Solar regulator 12v/24v 40A Wellsee be installed by a photovoltaic professional, or the installation instructions are strictly followed to avoid breakages and breakdowns due to incorrect installation.

Buy Solar regulator 12v / 24v 40A Wellsee

Buy Solar regulator 12v / 24v 40A Wellsee It is fast, safe and comfortable thanks to Wccsolar, plus the Solar regulator 12v / 24v 40A Wellsee It has an official Wccsolar guarantee. 

Contact us to receive more information.

Board Characteristics

• Model: WS-40A
• Rated voltage: 12/24 auto duty
• Input voltage range: 12V ~ 20V / 24V ~ 40V
• Drop Charge Loop Length≤1m: <0.25V
• Drop discharge loop Length≤1m: <0.05V
• Over voltage protection: 17V/34V
• Full load cut-off: 13.7V/27.4V
• Low voltage cut-off: 10,5V-11V/21V-22V
• Temperature compensation: -3mv/℃/cell
• No load loss: ≤ 30 mA
• maximum wire area: 6mm2
• Ambient temperature: -25℃ – 55℃